0
Add your answer:
Earn +20 pts
6 What is the difference between SS7 routing and IP routing?
qual a diferenca entre tcp/ip e ss7
What is the function of ss7?
Here are the main functions of SS71. It controls the network.2. The SS7 network sets up and tears down the call.3. It handles all the routing decision and supports all telephony services including call forwarding, caller ID, remote network management and local number portability (LNP).P$R
What is the difference between ISDN and SS7?
The Integrated Services Digital Network (ISDN) uses Digital Subscriber Signalling System No. 1 (DSS1) protocol interfaces to connect subscribers to the network. These are User-to-Network (UNI) interfaces. Signalling System No. 7 (SS7) is a suite of signalling protocols used in Network-to-Network (NNI) interfaces. These are connections between network elements within the ISDN.
Information can be transmitted via of which siganlling methods?
Depends what sort of signalling - SS7 is used in telecomms networks. Different flavours in different networks and customer to network interface is different to network to network
A modem is not important to connect the internet?
A modem is important you fuzzbag
6 What is the difference between SS7 routing and IP routing?
qual a diferenca entre tcp/ip e ss7
Whose SS7 point code is this 001-009-015?
Verizon
What is ss7 signaling?
SS7 signaling is a set of protocols used in telecommunications networks to handle the exchange of signaling messages. It allows for call setup, routing, and other essential functions in telecommunication networks. SS7 helps in establishing and managing connections between different network elements for services like voice calls, SMS, and data communication.
What is sigtran?
SIGTRAN (for Signaling Transport) is the standard Telephony protocol used to transport Signaling System 7 (SS7) signals over the Internet. SS7 signals consist of special commands for handling a telephone call.
What is the most popular signaling protocol used on traditional cirtcuit-switched PSTN connections?
SS7 is the correct answer!
How many hours from sw8 3ar to ss7 1tf?
It depends on whether you are driving, taking the train, cycling or whatever.
What is the function of ss7?
Here are the main functions of SS71. It controls the network.2. The SS7 network sets up and tears down the call.3. It handles all the routing decision and supports all telephony services including call forwarding, caller ID, remote network management and local number portability (LNP).P$R
Is there anything past super saiyan 4?
Yes if broly is a legendary super saiyan that mean that he can go up to ss4 ss5 ss6 ss7
What is the difference between ISDN and SS7?
The Integrated Services Digital Network (ISDN) uses Digital Subscriber Signalling System No. 1 (DSS1) protocol interfaces to connect subscribers to the network. These are User-to-Network (UNI) interfaces. Signalling System No. 7 (SS7) is a suite of signalling protocols used in Network-to-Network (NNI) interfaces. These are connections between network elements within the ISDN.
What is difference between H.248 and SIGTRAN?
h.248 helps mgc controle mg. sigtran helps ss7 transported through Ip network.just so so.
Information can be transmitted via of which siganlling methods?
Depends what sort of signalling - SS7 is used in telecomms networks. Different flavours in different networks and customer to network interface is different to network to network
What is In- channel signaling?
In-channel signaling is also often referred to as in-band signaling. See http://en.wikipedia.org/wiki/Signalling_(telecommunications)#In-Band_versus_Out-Of-Band and http://en.wikipedia.org/wiki/In-band_signaling.The signaling used to establish and tear down a phone call was located in the same physical communication channel used to carry the call (i.e voice, fax or modem) traffic, and used DTMF tones. Examples are CCITT Signaling Systems 1-5 R1 & R2. Most books on SS7 should talk briefly about this.SS6 & SS7 moved to take the signaling out-of band, and to establish a common channel for all signaling in digital packet-based format (non-tone based) allowing one signaling channel to control a large number of "voice" circuits.
