0
The reset button on the front of your PC is hardwired into a specific circuit on your motherboard. There is no way "turn off" this within software. But you can open up the case (with the machine unplugged of course) follow the wires that come out of the back of the switch & simply unplug them from the motherboard.
What else can I help you with?
How do you reset the hp 2035n back to the factory specs?
To restore the product to the factory-default settings, follow these steps. 1. Turn the product off. 2. Turn the product on, and while it is initializing press and hold both control-panel buttons at the same time until all the lights blink in unison.
How do you turn off a smart board?
You press the off button on the remote twice.
Where can i find the reset button on a gateway laptop?
Laptops do not generally have a reset button. However pressing and holding the power button usually forces the system to power off, and then pressing it again would start it back up thereby restarting the system.
How do you turn off the speakerphone on a telus migo?
To turn off the speaker phone on a telus migo hold down the 1 button for 5 seconds. Do the same to turn it on.
How do you program a minka aire remote?
with light switch off, hold the "off" button on the fan part of the control & then turn light switch on while still holding the button.
How do you reset your service button on a bora 05?
With igniton turned OFF press and hold in milage reset button with it held in turn ON ignition and turn milage reset button to the RIGHT
How do you reset the service indicator on vw caddy?
With ignition off, hold right (trip reset) button Turn ignition on Still holding trip button turn left (clock) button to minutes (clockwise) Release everything and turn off
How do you restart PS3?
Hit the reset button!What reset button you idiot. Hold the power button till it turns off, Then just turn it on again
How do you reset the change oil light on a 1991 Buick Park Avenue?
There is a reset button on the passenger side under the dash. Turn the ignigion on but don't start the car. Press and hold the reset button for about 5-15 seconds. Turn off ignigion and turn back on. It should reset then. If not, push the button with the ignition off and then turn the car on after the 15 seconds.
How do you reset the gauge cluster on 1999 dodge neon?
Turn the car to the on position. Hit trip reset button until it say trip. Now turn the key to off. Hold the trip button and turn to on. Release trip button after the needles reset.
Does a Nintendo DS have a reset button?
No, it doesn't. The only way you can reset a Nintendo DS is to turn it off and turn it back on again (hard reset).
How do you turn off maintenance required light on 2005 Honda civic dx?
Turn off your car hold down the reset button on your odometer for 5 seconds Turn on your car while continuing to hold down the reset button
How do you reset the service light on VW transporter T5?
Press milage button turn Ing on Turn clock button to the left and turn Ing off.:)
How do you reset the service reminder on 2004 polo 1.9 tdi?
1.Ignition off 2.Press and hold your mileage reset button 3.Turn ignition on 4.Let go of your reset button 5.Turn your clock button to the right and hold for 4 secs 6.Tada its reset 7.Turn your ingition off/on to confirm 8.Send me beer
How do you reset the service light on your fiat punto?
To reset the service light, fix the problem that cause the light to go off. Then turn the key to "On", press the odometer button until mileage shows, turn the key to "Off", hold down trip odometer reset button, turn the key 'On',release the trip odometer reset button after the display counts from 10 to 0.
How do you reset the maintenance required light in a 2007 Toyota Tundra?
press and hold trip/reset button turn key on, do not start. Wait for dash lines to go off in odometer reading space, once they have gone off release trip/reset button, turn key off: that should reset light.
How do I reset the maintenance needed light on my 2003 Honda Accord?
Turn the ignition switch to off. Now push and hold the odometer reset button in, now turn the ignition switch to the on position, wait from 10-15 second and the light should go off. Release the reset button an turn the ignition switch off.
