A forklift mast is the column up which the two blades move up and down to lift and lower a load on a pallet.
A hydraulic leak or failure in the lift cylinder can cause the forklift mast to lower suddenly. On the other hand, low hydraulic fluid levels or a worn-out lift mechanism may cause the mast to lower slowly.
Immediately behind the lift mast.
The extended height when forks are at top.
Yes
A loss of hydraulic fluid will cause a forklift mast to suddenly or slowly lower. The mast on a forklift is run by a system of tubing that is filled with hydraulic fluid. The mast might also fall suddenly if there is a break in the chain that holds the mast at a certain level or the chain is too loose.
A loss of hydraulic fluid will cause a forklift mast to suddenly or slowly lower. The mast on a forklift is run by a system of tubing that is filled with hydraulic fluid. The mast might also fall suddenly if there is a break in the chain that holds the mast at a certain level or the chain is too loose.
A bad connection would cause a forklift mast to suddenly or slowly lower. Check all your connection wires to ensure they are properly attached and working.
FSV on a Toyota Forklift is the code for Wide Visible Full-Free Lift Three Stage Mast.
A heavy frame with a lifting mast and forks in front
The hydraulic system raises and lowers the mast. If it lowers unexpectedly then you may have a leak in the system, or not enough fluid.
That means the top of the mast when platform is max up.