You may have to tap, with a small mallet, on the power steering pump in order to remove it.
You remove the cap on the power steering reservoir, and pour fluid in until it is at the full mark.
Yes , it has power steering
1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement . 2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible. 3. Place drain pans under the vehicle as needed. 4. Remove the drive belt. Refer to Drive Belt Replacement . 5. Remove the steering gear heat shield. Refer to Steering Gear Heat Shield Replacement ( See: Steering Gear > Removal and Replacement) . 6. Remove the right side catalytic convertor. Refer to Catalytic Converter Replacement - Right Side . 7. Disconnect the power steering fluid reservoir outlet hose (1) from the power steering pump. 8. Disconnect the power steering gear inlet hose (1) from the power steering pump. 9. Remove the power steering pump bolts (2). 10. Remove the power steering pump (1) from the vehicle. 11. Transfer any parts as needed.
Assuming you are putting it in the power steering, why not?
where to put power steering in a 2007 Pontiac gran prix
Where is the power steering fluid reservoir
NO! Use power steering fluid.
On the back side of the power steering pump
The power steering is electric.....a motor runs it.
It doesn't have a bleed valve for the power steering.
you don't. Chevy cobalts are electric power steering