how do I remove my air bag from my mercury sable
First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on. First pull the fuse to the air bags then remove the rubber cover on the stearing wheel. You will then see 4 to 6 bolts to remove the air bag and the air bag mounting bracket. After removing the bolts you will then need to unclip the air bag connector and then you will be able to remove the airbag. Then you will see a nut on the stearing will shaft, remove it and then you will need a wheel-puller to remove the stearing wheel due to the fact that it is pressed on.
You have to remove the spring clip from the solenoid valve on the air bag and turn it left, which will bleed the air out of that air bag you have to do this to each air bag individualy.
you remove it
disconnect battery, remove air bag fuse and yellow arming wire to each air bag you are disconnecting.Be Carefull !
Under the air bag. First remove air bag and one clip will be holding module into column
It is illegal to remove the air bag from any vehicle.
It is illegal to remove the air bag from any vehicle.
You take it out
Disconnect the negative battery terminal and remove the fuses pertaining to the air-bag(s)
how do you remove the SRS?
Removing or disabling the air bag is illegal, unless you have permission from the NHTSA. There is no need to remove the air bag. You can have an on/off switch installed by a professional, if you have a good reason for not wanting the bag to work. Read this: http://www.airbagonoff.com/?scid=.%2f