where is the drain plug for hydraulic fluid on 743 bobcat
3x18
most likely your charge pump or main pumps are not working or being driving. From as simple as the belt not spinning them, to something after pulley, that is sheared or broken
Bobcat Fluid part number 6563328 or 10w-30, 10w-40 Class SE motor oil. Use 5w-30 where temps are below -10F.
9 quarts
how to fix bobcat loader that will not lift or tilt on a 1989 743 bobcat.
Aprox. 4600 lbs.
All Bobcats use Bobcat Premium Hydraulic/Hydrostatic Fluid.
A Bobcat loader that will not lift or tilt probably is low on hydraulic fluid. Check the hydraulic fluid and fill to the recommended level.
The Bobcat 743B uses propane as the engine's fuel source.The Bobcat 743 utilizes diesel as the primary fuel source. The difference between a 743 and 743B bobcat are undercarriage improvements and an improved bobtach mounting plate on the front of the loader for hooking up attachments. If you were looking for propane powered units try the 742 or 742B. The 742 has a Ford industrial 4 cylinder in it and the 742B has a Mitsubishi indutrial engine in it, both of which can be converted to run on propane. On the older machines the model number for example 743, the 3 means liquid cooled diesel engine
model 600 Bobcat hydraulic filter in in front of the engine down at the bottom of engine compartment. It's a cartridge type #946865.
there is no hydraulic drain plug on a bobcat 763 you need to pull a line off the bottom of the tank like when you change the case drain filters