The best way to find an excavator construction site is visit the town hall an ask where there are excavator construction sites in the city. There they will be glad to help you.
The wet kit is the water pump/radiator on excavator
yes
# jake is the best
65,000 kgs
a bucket wheel excavator is 200 to 350 metres tall
The way any other excavators does it's the same
Badger 228
Yes, "The Throwback" is the novel where the Bucket-Wheel Excavator gang appears. It was written by Tom Sharpe and published in 1978.
why swing and bucket not working properly
The main thing that comes up when you look for an excavator bucket is www.ebay.com. They have lots of new and used ones for good prices. You will also be able to find all your farming needs there as well.
Richard H. Garrett has written: 'Bucket wheel excavator study' -- subject- s -: Excavating machinery, Evaluation
A backhoe excavator is one that has a loading bucket on the front and a hoe on the back. Such as a Case 580 backhoe
The way any other excavators does it's the same
Searching for this seems to lead to just one result, which is eBay. There are thousands of sellers on eBay, so you have a chance of finding an excavator bucket. You might also try some tractor stores.
Essentially, excavator productivity is typically measured by the volume of loose or rock soils the machine can displace in a hour of continuous operation. Understand the formula for calculating excavator productivity. The formula is as follows: Q = (60*q*z*n*kf) / kl, where Q is the productivity of the excavator, q is the capacity of each rotor bucket in cubic feet, z is the number of buckets on the wheel and n is the speed of rotation of the rotor, measured in revolutions per minute. kf stands for the filling factor of a bucket while kl represents the soil-loosening factor. Gather the data. Typically, you can get the date for the capacity of each rotor bucket in cubic feet, the number of buckets on the wheel and the speed of rotation of the rotor from the operator's manual of your excavator, supplied by its manufacturer. The filling factor of the bucket and the soil-loosening factor can be determined experimentally. The filling factor, ranging from 0 to 1, determines the degree of the excavator bucket's utilization. For example, whether it is half-full or three-quarters-full determines the excavator bucket's utilization. To determine the soil loosening factor, which is always greater than 1, calculate by how much the density of the soil in the ground is greater than the density of the excavated soil. For example, if the soil loosens by 10 percent, the soil-loosening factor is 1.1. Use the formula from Step 1 to calculate excavator productivity. For instance, if the capacity of each rotor bucket is 10 cubic feet, the wheel has only one bucket, the rotor rotates at a speed of 5 rotations per minute, and the filling factor and the soil loosening factor are one, the productivity of the excavator stands at: Q = (60*q*z*n*kf) / kl = (60*10*1*5*1) / 1 = 3,000 cubic feet per hour. kf stands for the filling factor of a bucket while kl represents the soil-loosening factor.
A bucket crusher is a crusher inside a bucket that is attached to an excavator and so used. To clarify, you can view a video demonstration of how they work here... http://www.bucketcrusher.co.nz/?page_id=201