The name. Spartek tile is a brand of tile and Ceramic tile is a type of tile.
Carefully and you wallk on the fronts of the tiles, if you step in the midle of the tile they are more prone to break, especialy if they are new.
This answer pertains to tile set on a concrete substrate! Assuming your thin-set is properly mixed with correct water ratio, the substrate is free of any bond breakers, and it is troweled for the type of tile your using, the most common problem is moisture coming up through the slab collecting at the tile/substrate interface. If you are in a humid climate the HVAC will pull moisture out of a concrete into the less humid interior. Water breaks down the thin-set bond to the tile and emulsifies other mastic's/glues intended to secure a VCT product. The best way to prevent moisture from wicking through a slab is to waterproof the concrete substrate with a product that will will stop this moisture transfer. It will also prevent the alkali in a concrete from coming out to a surface where it reacts with an atmosphere. Alkali burn causes a paint to bubble, peel and blister off a concrete. With a waterproofed concrete this alkali does not migrate out and form efflorescence salts. When you stabilize concrete, contaminates don't enter and moisture doesn't travel to a surface.
Tile is a building material you can use in commercial and residential use. There are certain kinds of tile you can use and they can be installed indoors and outdoors. You can choose between ceramic tile, porcelain tile, glass tile, slate, natural stone tile, and other types.
Bead blast or score the concrete first anything from a wire brush to a floor sander might work...be VERY CAREFUL with the dust though
The name. Spartek tile is a brand of tile and Ceramic tile is a type of tile.
Here are some key points to consider when deciding between concrete and tile flooring for building construction: Concrete flooring is durable, long-lasting, and requires minimal maintenance. It is ideal for spaces that are exposed to moisture, such as basements or garages. Tile flooring is available in a wide range of styles and designs, making it a popular choice for residential and commercial spaces. It is also easy to clean, durable, and can add value to a property. Concrete floors can be hard and uncomfortable to stand on for long periods of time. Tile flooring can be more expensive than concrete, and it may require more maintenance over time to prevent cracks, chips, or discoloration. The choice between concrete and tile flooring ultimately depends on the specific needs and preferences of the space and its occupants.
To replace the decorative tile border on a concrete pool, the pool will have to be drained. The old tile needs to be taken off and a new tile with waterproof grout or concrete can be installed. The pool should dry for a week or so, before it is refilled.
Hollow concrete tile blocks were first used soon after the ancient Romans developed concrete. It was not very strong, but it was strong enough to be a tile.
The answer to your question is yes you can, however it should hold for about a week or so but not last. What you want to do is pour about 3" of concrete and then install the tile.
It could be done, yes.
With thinset.
No, it's okay to leave on.
Concrete, tile, marble. granite, glass.
Thinset mortar. There's a special one for porcelain tile; any thinset will work for regular ceramic tile.
Ceramics, tile, concrete among others
Wait till it dries then peel it off.