0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the weight of a t16 reinforcement bar?
Weight is 1.579 kg/m
What is the weight of 8mm steel reinforcement bar?
0.39 kg/metre
What is the meaning of steel re bar?
Rebar is an informal term for steel "reinforcing bar". These are steel bars that are placed within the structure before the wet concrete is placed. Steel reinforcement is necessary for almost all structural concrete because concrete has virtually no tensile or shear strength. The rebar provides almost all of the resistance to tension and shear within the structure.
What is maximum pitch spacing for spiral reinforcement in the columnc or piles as American building code recommends 10mm diameter bar size and maximum pitch 75mm .Did any other code recommends more?
*
What mean by anchor bar in beam reinforcement?
the top reinforcement of beam (compression face of beam). it is provided to hold the stirrups in place.
What is the instrument used to check the reinforcement bar in concrete member?
A cover meter determines the distance from the outside face of the concrete to the depth of the reinforcement bar.
What is the weight of a t16 reinforcement bar?
Weight is 1.579 kg/m
What is the weight of y'12 reinforcement bar?
.888kg/m
What is the weight of 10mm steel reinforcement bar?
The weight of a 10mm steel reinforcement bar is approximately 0.616 kilograms per meter.
What is the weight of 8mm steel reinforcement bar?
0.39 kg/metre
What is weld lap length of reinforced concrete bars?
when length of reinforcing bar is small and we have to provide longer reinforcement in that case the second bar is provided with proper overlapping with the first bar this overlapping is known as lap length. the straight length of shall not be less than 12mm dia and 200mm length.
How do you find reinforcement bar running meter weight?
mass=density/volume
What is the weight of 1meter length of 10mm sariea?
The weight of 1 meter length of 10mm diameter Saria (steel reinforcement bar) can vary depending on the density of steel used and the specific composition of the Saria. On average, a 1 meter length of 10mm diameter steel bar would weigh approximately 0.6-0.8 kilograms. It's best to refer to the manufacturer's specifications for precise weight information.
How much the weight per meter of 20mm rebar?
The weight per meter of a 20mm diameter rebar is approximately 2.47 kilograms.
Is re-bar and reinforcement bar is same?
Yes.A rebar, or reinforcing bar, is a common steel bar, and is commonly used in reinforced concrete and reinforced masonry structures. It is usually formed from carbon steel, and is given ridges for better mechanical anchoring into the concrete. It can also be described as reinforcement or reinforcing steel. In Australia, it is colloquially known as reo.To know more about rebar visithttp://en.wikipedia.org/wiki/Rebarhttp://www.rgsrebar.com
How much steel is required for 1m3 concrete?
96kg steel bar is use in 1m3 but also depend on diameter of bar
What is the weight of one foot of three quarter inch diameter steel bar?
The weight of one foot of a three-quarter inch diameter steel bar will be approximately 1.42 pounds.
