You are better off ripping out the tiles first. If you really want to lay the hardwood over the tiles, first lay down 3/4 plywood so you have something to staple the new floor to. The ply is glued down with PL, and then screwed into the tiles/sub floor. You will need to pre drill with a masonary bit, and screw in every 12 inches. Seems like more work than ripping the tiles out. And adds an extra 3/4 + tile height + hardwood - how will that transition to other rooms?
If there is a concrete sub-floor and you cannot remove the linoleum, make sure that it is well-bonded, clean and free from all surface contaminates. Roughen the surface with coarse sandpaper or disc. Remove all large particles and mop with a damp mop. Make sure you use a latex-modified thin-set to assure a good bond to the vinyl. If you have a wood sub-floor at least 3/4" inches think you can use most cement board without disturbing the existing linoleum. Again a laxtex modified thin-set is needed both under the cement board and with the tile. In addition to thin-set, you need to screw the board down every 8 inches. It sounds like over kill, but you want to make sure the board won't move with any settling your home might do or the natural expansion and contractions of the wood sub-floor.
Depends where ya live. In MIchigan Its $5 to 8 a square ft. that's just labor. Ya get what ya pay for. It also depends if its walls or floors, what prep work needs to be done.If the floor is level,ect. Some companies have a standard price for 3 walls over a tub,or backsplash's What is the cost of installing ceramic tile in Dallas Tx?
Yes. The vinyl has to be specially cleaned and treated in order for the adhesive to stick. Special products and instructions are available at most home improvement stores.
Bead blast or score the concrete first anything from a wire brush to a floor sander might work...be VERY CAREFUL with the dust though
Because indians generally want to build 2 to 4 floors over and over on the flat roof...
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
There is no reason not to install carpet over wooden floors. If you want to learn how to do this, visit the DIYNetwork website. Once on the page, type "How to install carpet over hardwood flooring" into the search field at the top of the page and press enter to bring up the information.
Yes, but I wouldn't recommend it. You will regret it later. Tile needs a cement base to adhere to. A wooden base is not good for ceramic tiles. I have seen tile floors where people have tiled over the wood. The tiles are loose, cracked and unlevel. The grout is coming out and water seeps through the floor.
Yes
No, you should never do that, it will defeat the purpose of having ceramic tile and it does not look good.
You can in areas like a kitchen back splash. Just use a mastic glue. Don't tile over drywall in areas prone to high moisture, such as a shower, tub or floors.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
Yes, but it would have to be floating engineered wood.
yes, but it will slide over the years so I would not
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
Many things can go over ceramic with ease, but the "best" option is one which works in the room you're doing. For example, laminate flooring is most forgiving of the unevenness (groutlines) of ceramic tile and easiest to install - but I would not put laminate in a bathroom (it's not moisture resistant). For a bathroom, the best option over ceramic is sheet vinyl. Be sure to use leveling compound to smooth grout lines even with the surface of tiles first.
I would get advice from a professional. I suspect that the cement backed board (plaster board?) would crack and turn to powder under the flexing as people walk across the floor.
Yes, but you should you use an adhesive that is ductile