0
Use a magnet. The magnet will remove the iron filings form the sand.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What method of separation would be used to separate sand from water?
To separate sand from water, you can use the method of filtration. Pour the sand and water mixture through a filter paper or a sieve. The sand particles will be trapped on the filter paper or sieve, while the water will pass through, resulting in the separation of sand from water.
Can sieving method be used to separate iodine crystals and iron filling?
Yes, the sieving method can be used to separate iodine crystals and iron fillings. This method relies on the difference in particle size between the two substances to effectively separate them through a sieve or mesh screen. The smaller iodine crystals will pass through the sieve, while the larger iron fillings will be retained on top, allowing for separation.
How can you separate a mixture of iron filings sand and camphor?
To separate the mixture, you can use a magnet to attract and remove the iron filings first. Then, you can add water to the remaining mixture, as sand will sink and camphor will float. By decanting the water, separated sand and camphor can be obtained.
How would you separate a mixture of sand and salt?
To separate a mixture of sand and salt, you can dissolve the salt in water. The salt will dissolve, leaving the sand behind. You can then filter out the sand to separate it from the salt solution, which can be evaporated to recover the salt.
What technique will use to separate sand from table salt?
To separate a mixture of salt and sand, take the whole thing and chuck it in a container like a bowl or bucket. Now add water to cover the mixture, and stir well to dissolve the salt. Pour the liquid off through a filter and collect the solution that comes through. Rinse the sand with more water, and let that come through the filter as well. Now you have wet sand (that has had the salt washed out of it) and a solution of salt and water. If you spread the sand out on a clean flat surface, you can let it dry and then recover your sand. Take the solution of salt and water and heat it to "reduce" it, and then put the solution on "low" to quickly evaporate the water and leave the salt. Recover the salt and finish drying it if it is not dry already. You have performed a physical process to separate a mixture, and you've recovered your two original materials.
The best way to separate iron fillings and salt?
using distillation
Which equipment will best separate a mixture of iron fillings and black pepper?
a magnet will pull the iron out of the black pepper
Best deicing for bricks driveway?
Rock salt mixed with course sand.
What type soil is best for growing datura plants?
The best type of soil for growing these plants is sand and top soil mixed with a little vitamin d.
How do you pav over cement slab best way portland cement sand or motor and sand?
i am paving drive way with Boston city paves i want Portland cement type 11 mixed with sand and additive. thank you
If you have fine sand particles in water what is the best mechanical way to get rid of the sand?
The best mechanical way to remove fine sand particles from water is through filtration. Using a fine mesh or filter, the water can pass through while the sand particles are trapped, allowing you to separate the sand from the water. This method is effective in cleaning the water by physically removing the sand particles.
What method of separation would be used to separate sand from water?
To separate sand from water, you can use the method of filtration. Pour the sand and water mixture through a filter paper or a sieve. The sand particles will be trapped on the filter paper or sieve, while the water will pass through, resulting in the separation of sand from water.
Can fractional distillation best separate a mixture of sand and sulfur?
Fractional distillation is not the best separation method for a sand and sulfur mix. It's a very poor choice as it won't work. Use a solvent for the sulfur like dimethyl ether of, say, diethylene glycol. It will take the sulfur into solution and you can wash the solution out of the sand.
If you need to separate pebbles flour and Epsom salts that have been mixed with water what methods would be best to do this and in what order?
you can seperate it by using a screem
Can sieving method be used to separate iodine crystals and iron filling?
Yes, the sieving method can be used to separate iodine crystals and iron fillings. This method relies on the difference in particle size between the two substances to effectively separate them through a sieve or mesh screen. The smaller iodine crystals will pass through the sieve, while the larger iron fillings will be retained on top, allowing for separation.
What is best for cement mortar fine sand or coarse sand?
Fine sand is best for mortar.
How do you separate a mixture of sand salt and oil?
Pour the oil and sand in a glass of water. The sand will sink to the bottom, and the oil will float to the top of the water.
