6.28cm3
You would get calcium chloride and water if you mixed calcium hydroxide and hydrochloric acid.
The reaction between baking soda and calcium chloride would produce carbon dioxide gas. The volume of gas produced would depend on the reaction conditions (temperature, pressure, etc.). To accurately determine the volume of gas produced, you would need to perform the reaction and measure the gas volume using appropriate techniques.
To obtain pure crystals of calcium chloride, you can start by dissolving calcium chloride in water to form a saturated solution. Then, allow the solution to cool and evaporate slowly, which will cause calcium chloride crystals to form. Once the crystals have formed, they can be filtered and dried to obtain pure crystal calcium chloride.
One yard of calcium chloride would weigh approximately 2676.64 pounds, assuming a density of 94 pounds per cubic foot for calcium chloride.
6.28cm3
The density of calcium chloride is approximately 2.15 g/cm3. By dividing the mass by the density, you can calculate the volume. In this case, 15.7 g of calcium chloride would occupy around 7.3 cm3 of volume.
To find the volume of 15.7 g of calcium chloride with a density of 2.50 g/cm³, you would use the formula: Volume = Mass / Density. Plug in the values: Volume = 15.7 g / 2.50 g/cm³ = 6.28 cm³. Therefore, 15.7 g of calcium chloride would occupy a volume of 6.28 cm³.
calcium chloride
To make a 5% solution of calcium chloride with a total volume of 500 ml, you would need to add 25 grams of calcium chloride. This is calculated by multiplying the volume of the solution (500 ml) by the desired concentration (5%) and converting to grams.
You would get calcium chloride and water if you mixed calcium hydroxide and hydrochloric acid.
To find the number of chloride atoms in 654.5 grams of calcium chloride, you would first calculate the number of moles of calcium chloride using its molar mass. Then, since each formula unit of calcium chloride contains two chloride ions, you would multiply the number of moles by 2 to find the number of chloride atoms.
what do you expeat to find in calcium chloride in ocean water
To make calcium chloride and water, you would react calcium oxide or calcium hydroxide with hydrochloric acid. The reaction would be CaO + 2HCl → CaCl2 + H2O or Ca(OH)2 + 2HCl → CaCl2 + 2H2O.
Iron will not rust in the presence of calcium chloride because calcium chloride is a desiccant that absorbs moisture from the surrounding environment, which prevents the formation of rust on iron surfaces.
The reaction between baking soda and calcium chloride would produce carbon dioxide gas. The volume of gas produced would depend on the reaction conditions (temperature, pressure, etc.). To accurately determine the volume of gas produced, you would need to perform the reaction and measure the gas volume using appropriate techniques.
A gallon of calcium chloride typically weighs around 10 to 11 pounds.