14 percent sodium hypochlorite refers to the weight concentration of sodium hypochlorite in the solution. It does not refer to the concentration of chlorine gas, which would be different due to the molecular weight difference between sodium hypochlorite and chlorine gas.
The factor used to determine percent purity of sodium hypochlorite is the amount of available chlorine. This is typically expressed as a percentage and is used to indicate the concentration of the active ingredient in the sodium hypochlorite solution.
If the percent by mass of sodium hypochlorite (NaClO) in the bleach solution is 5.24%, then 100% - 5.24% = 94.76% is the water weight. For a 2500.0g solution, the mass of NaClO is 5.24% of 2500g = 131g. Since the remaining mass is water, the mass of NaCl (sodium chloride) in the solution would be zero.
To make a 2% sodium hypochlorite solution from a 12% solution, you can set up the equation: 12% solution * x litres = 2% solution * 100 litres Solving for x, you get: x = (2% solution * 100 litres) / 12% = 16.67 litres Therefore, you would need 16.67 litres of the 12% sodium hypochlorite solution to make 100 litres of a 2% solution.
Sodium hypochlorite typically has a pH between 11-13 when in solution.
dielectric constant for sodium Hypochlorite
14 percent sodium hypochlorite refers to the weight concentration of sodium hypochlorite in the solution. It does not refer to the concentration of chlorine gas, which would be different due to the molecular weight difference between sodium hypochlorite and chlorine gas.
The factor used to determine percent purity of sodium hypochlorite is the amount of available chlorine. This is typically expressed as a percentage and is used to indicate the concentration of the active ingredient in the sodium hypochlorite solution.
The mass of sodium hypochlorite in 2,5 kg solution is 131,25 g.
If the percent by mass of sodium hypochlorite (NaClO) in the bleach solution is 5.24%, then 100% - 5.24% = 94.76% is the water weight. For a 2500.0g solution, the mass of NaClO is 5.24% of 2500g = 131g. Since the remaining mass is water, the mass of NaCl (sodium chloride) in the solution would be zero.
To make a 2% sodium hypochlorite solution from a 12% solution, you can set up the equation: 12% solution * x litres = 2% solution * 100 litres Solving for x, you get: x = (2% solution * 100 litres) / 12% = 16.67 litres Therefore, you would need 16.67 litres of the 12% sodium hypochlorite solution to make 100 litres of a 2% solution.
Sodium hypochlorite typically has a pH between 11-13 when in solution.
Sodium hypochlorite solution typically contains around 5-6% available chlorine.
2-0-1-ox
Sodium hypochlorite is a clear, slightly yellowish solution. It is commonly known as bleach and is used for its disinfectant properties.
Ultra bleach typically contains around 5-6% sodium hypochlorite.
Sodium hypochlorite is typically a liquid at room temperature. It is commonly used as a bleach or disinfectant.