Wiki User
∙ 10y agofhhjjf
Wiki User
∙ 10y agoUsing a thick copper wire as a fuse is not recommended because copper wire has low resistance and will not effectively limit the current flow in case of an overload. This can lead to damage of the circuit or equipment and potentially cause a fire hazard due to excessive current passing through the wire. It's important to use the appropriate fuse rated for the circuit to ensure safety.
Sodium chloride (table salt) can be used to coat a copper item and fuse the 3-volt bulb of a torch, as it helps to create a galvanic cell that generates enough voltage to light the bulb.
Platinum has a higher melting point than copper, so it requires more heat to fuse. Additionally, platinum has lower thermal conductivity compared to copper, causing it to retain heat and weaken more easily in high-temperature environments like a glass-making process.
It is not possible to fuse lead and copper together due to their differing melting points. Lead melts at a lower temperature than copper, so they would not form a strong bond when melted together. It is best to use mechanical methods such as soldering or welding to join lead and copper.
Some household objects that may contain copper include electrical wires, plumbing pipes, cookware, and decorative items such as statues or lighting fixtures. Copper is also commonly found in small electronic devices like smartphones and laptops.
A fuse in chemistry is a safety device designed to prevent an electrical circuit from overloading. It is typically made of a metal wire or strip that melts when too much current flows through it, breaking the circuit and preventing damage to equipment or a potential fire hazard.
If a thick copper wire is used in a fuse then by definition of a fuse this device would no longer be defined as a fuse. A fuse in a circuit is used to protect the conductors feeding the load of that circuit. The circuit, if using a thick copper wire in a fuse, would then be considered as a non fused circuit.
copper and tin
copper and tin
yes very safe.add. Fuse wire is usually made of tin-plated copper. The fuse wire may well get warm in service, and a bare copper wire will gradually oxidize and will fail sooner as a consequence.
Fuse wires typically contain around 99% copper. This high copper content helps to ensure good conductivity and heat resistance, which are important properties for fuse wires to effectively protect electrical circuits.
tungsten or sometimes copper
Copper is used in fuses because it has a low melting point, making it ideal for melting and breaking the circuit when there is an overload of current. This helps to protect the electrical system from damage caused by too much current flowing through it. Additionally, copper is a good conductor of electricity, ensuring efficient flow of current in the fuse.
i think it is in the term of Few centimeters or less. Actually the length of fuse does not show it's quality.The operating range depends upon how thick it is. and cross sectional are of a wire can we observe from gauge table simply if you know what maximum current will flow .
Yes the glow plug fuse is the R2 relay in the fuse box, there is a fusible link as well that is the thick red one coming out the front of the fuse box
A 30 amp fuse wire typically has a diameter of around 0.08 inches (2 millimeters).
when the fuse is not working
Apparently mainly tinned copper is used in fuse wires. I have heard that there are a lot of other metals used as teh fuse wire though!