0
Cross bonding of Extra High Voltage (EHV) underground cables involves connecting the metallic sheaths of each cable together at regular intervals in order to mitigate the effects of induced voltages and currents during faults or transient conditions. This helps in reducing the risk of insulation failures and ensures the overall safety and operational reliability of the underground cable system. Proper design and installation of cross bonding are essential to maintain a low-resistance path for fault currents to flow through, thereby preventing damage to the cables and associated equipment.
Add your answer:
Earn +20 pts
What is MIMS cable?
MIMS (Multiple Independent Monitored Service) cable is a type of underground communication cable used to provide high-speed and reliable internet connectivity in urban areas. It typically consists of multiple fiber-optic strands for data transmission and copper wire pairs for power supply and monitoring services. MIMS cables are known for their durability and resistance to environmental factors.
Why does a CAT6 cable have a plastic core?
The plastic core in a CAT6 cable helps to separate and maintain the twisted pairs of wires in the cable, reducing signal interference and crosstalk. It also provides structural support and protection to the internal wires, ensuring better performance and durability of the cable.
What type of energy does electrical cable have?
Electrical cables carry electrical energy in the form of electricity. The energy is transmitted through the conductive materials within the cable, such as copper or aluminum wires.
What channel is oxygen on regular TV?
The channel for Oxygen on regular TV can vary depending on your location and cable provider. You may need to check your local TV listings or contact your cable provider for the specific channel number in your area.
When used on a copper based cable a continuity tester applies a small amount of what to each conductor?
When used on a copper-based cable, a continuity tester applies a small amount of voltage to each conductor to determine if there is a complete path for the electricity to flow. By measuring the resistance and flow of current, the tester can assess if there are any breaks or interruptions in the copper conductors.
What is underground feeder cable?
It is a cable that feeds.
What is the diffirence between Cross cable and state cable?
The difference between a cross cable and a state cable is that a cross cable, or crossover cable, is used specifically to connect two of the same devices.
How do you design an 11kv underground cable?
It is not necessary to design an 11 kv underground cable. There are several 11 kv underground cables already on the market. You can choose exactly which cable will fit best for your project and purchase it.
What type of armour cable to you need to run underground to your garage?
Armoured cable is not rated for underground installations. You have to use a cable with a designation for direct burial or wet and damp locations.
What should be the distance between underground power cable and telephone cable?
300mm
How do you use switch to switch cable?
cross cable
What cable is used to connect a modem and a switch?
cross cable
Which of the cable are used to connect two computers?
Cross cable.
What are the different power system losses and how can it be eliminated?
The major power-system loss is probably the loss in the resistance of power cables, both overhead and underground. The power loss can be reduced by using a thicker wire, at a greater cost for purchase of the wire. Obviously there is an optimum, minimum-cost size for the cable. A theory for deciding it is called Kelvin's Law. Overhead cable usually have a cross-section area of 150-400 mm-squared.
How do you find cross sectional area of cable when you have the lent current and the voltage drop?
cross sectional area of cable * voltage drop
Service entrance cable underground feeder branch circuit cable mineral insulated cable jacketed cable?
These are different types of electrical cables used for various applications. Service entrance cable is used to connect the utility power to a building's main electrical panel. Underground feeder branch circuit cable is used for underground wiring between buildings or from the main panel to subpanels. Mineral insulated cable is a type of fire-resistant cable used in high-temperature environments. Jacketed cable refers to any cable with an outer protective covering for mechanical and environmental protection.
What kind of cable is needed to connect a switch to a switch?
cross over cable
