answersLogoWhite

0


Best Answer

Check for damage, volume (is it the correct volume for your procedure? is it a blow out pipette? where the meniscus should fall before proceeding), clean and dry, use index finger to control volume, always condition equipment.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar
More answers
User Avatar

AnswerBot

6mo ago

Always wear appropriate personal protective equipment, such as safety goggles and gloves, when using a burette. Handle the burette with care to prevent breakage, and ensure it is securely clamped to a stand during use. Additionally, be cautious when pouring or dispensing chemicals to avoid spills and splashes.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

You should have an adequate buret clamp or stand to hold the buret while you work with both hands.

Verify that the stopcock is closed before you fill it, especially if you are using a corrosive chemical.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

When using a beaker be sure to wear safety gloves and a lab apron

This answer is:
User Avatar

User Avatar

Wiki User

7y ago

- avoid contamination of pipettes
- use clean and dry pipettes
- carefully read the inscription with temperature, volume, emptying mode, glass quality, error

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Safety precautions of using a burette?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Chemistry

What are the safety precautions in using beaker?

When using a beaker, always wear appropriate personal protective equipment such as gloves and safety goggles. Ensure that the beaker is placed on a stable surface to prevent spills or breakage. When heating liquids in a beaker, use caution to avoid thermal burns and always use a heat-resistant mat.


What are the precautions in titration?

Some precautions in titration include ensuring all glassware is clean and dry, using appropriate protective equipment such as safety goggles and gloves, being mindful of the possible hazards of the chemicals being used, and accurately measuring and recording volumes to prevent errors. It is also important to perform titrations in a well-ventilated area and dispose of waste properly.


What are the factors that should be considered while using a burette?

When using a burette, it is important to consider factors such as calibration accuracy, proper rinsing to prevent contamination, ensuring the burette tip is free from air bubbles, using appropriate safeguards to prevent spills and breakage, and practicing precise reading techniques to accurately measure the volume of liquid dispensed.


What is the purpose rinsing the burette with distilled water during titration?

Rinsing the burette with distilled water helps to remove any impurities or residue that may be present inside the burette. This ensures that there are no contaminants that could affect the accuracy of the titration results.


What are the Safety precautions observed during electrolysis of brine?

During electrolysis of brine, safety precautions include wearing protective goggles and gloves to prevent contact with the chemicals, ensuring good ventilation as hydrogen gas may be produced, and keeping the electrical setup dry to prevent electrocution hazards. Additionally, using proper tools and equipment, following manufacturer instructions, and having a fire extinguisher nearby are important safety measures.

Related questions