0
To prepare 0.01M sulfuric acid, dilute 1 volume of concentrated sulfuric acid (98%) with 99 volumes of water. Always add acid to water slowly while stirring to prevent splattering and heat buildup. Remember to wear proper personal protective equipment and work in a well-ventilated area when handling concentrated acids.
Add your answer:
Earn +20 pts
Ho to prepare 0.02 N sulfuric acid?
To prepare 0.02 N sulfuric acid, dilute concentrated sulfuric acid with water in a specific ratio. For example, to prepare 100 ml of 0.02 N sulfuric acid, you would mix 0.4 ml of concentrated sulfuric acid (98% purity) with 99.6 ml of water. It's crucial to handle concentrated sulfuric acid with caution due to its corrosive nature.
How do you prepare 7M sulfuric acid from concentrated sulfuric acid?
To prepare 7M sulfuric acid from concentrated sulfuric acid, first calculate the volume of concentrated sulfuric acid needed to make 7M solution. Then, measure the calculated volume of concentrated sulfuric acid and carefully dilute it with water to the desired volume while stirring continuously. Make sure to add acid to water slowly to prevent splashing or generation of heat.
How to prepare 0.5M sulfuric acid?
To prepare 0.5M sulfuric acid, you would mix concentrated sulfuric acid with water in the correct ratio. For example, to make 500 mL of 0.5M sulfuric acid, you could mix 25 mL of concentrated sulfuric acid with 475 mL of water. Always remember to add acid to water slowly to avoid splashing and heat generation.
How do you prepare 0.125 N sulfuric acid?
To prepare 0.125 N sulfuric acid, you would first need to calculate the amount of sulfuric acid needed by using the formula: (desired normality) x (equivalent weight) x (volume in liters) = mass of the substance. Then, weigh out the required amount of sulfuric acid and dissolve it in water to make the desired volume of solution.
How to prepare nitrate test solution using diphenylamine in sulphuric acid?
To prepare a nitrate test solution using diphenylamine in sulfuric acid, you can mix diphenylamine with concentrated sulfuric acid in a specific ratio. Typically, a 0.1% diphenylamine solution in concentrated sulfuric acid is used for nitrate testing. Follow safety precautions when working with concentrated sulfuric acid as it is corrosive.
Ho to prepare 0.02 N sulfuric acid?
To prepare 0.02 N sulfuric acid, dilute concentrated sulfuric acid with water in a specific ratio. For example, to prepare 100 ml of 0.02 N sulfuric acid, you would mix 0.4 ml of concentrated sulfuric acid (98% purity) with 99.6 ml of water. It's crucial to handle concentrated sulfuric acid with caution due to its corrosive nature.
How do you prepare 7M sulfuric acid from concentrated sulfuric acid?
To prepare 7M sulfuric acid from concentrated sulfuric acid, first calculate the volume of concentrated sulfuric acid needed to make 7M solution. Then, measure the calculated volume of concentrated sulfuric acid and carefully dilute it with water to the desired volume while stirring continuously. Make sure to add acid to water slowly to prevent splashing or generation of heat.
How to prepare 0.5M sulfuric acid?
To prepare 0.5M sulfuric acid, you would mix concentrated sulfuric acid with water in the correct ratio. For example, to make 500 mL of 0.5M sulfuric acid, you could mix 25 mL of concentrated sulfuric acid with 475 mL of water. Always remember to add acid to water slowly to avoid splashing and heat generation.
How do you prepare 0.125 N sulfuric acid?
To prepare 0.125 N sulfuric acid, you would first need to calculate the amount of sulfuric acid needed by using the formula: (desired normality) x (equivalent weight) x (volume in liters) = mass of the substance. Then, weigh out the required amount of sulfuric acid and dissolve it in water to make the desired volume of solution.
How to prepare nitrate test solution using diphenylamine in sulphuric acid?
To prepare a nitrate test solution using diphenylamine in sulfuric acid, you can mix diphenylamine with concentrated sulfuric acid in a specific ratio. Typically, a 0.1% diphenylamine solution in concentrated sulfuric acid is used for nitrate testing. Follow safety precautions when working with concentrated sulfuric acid as it is corrosive.
How do you prepare 7 N sulfuric acid?
To prepare a 7 N (Normal) solution of sulfuric acid, you would first need to calculate the molarity of the solution. Sulfuric acid is a diprotic acid, so its equivalent weight is half its molecular weight. To prepare a 7 N solution, you would dissolve 7 moles of sulfuric acid in enough water to make 1 liter of solution. It is crucial to wear appropriate personal protective equipment and handle sulfuric acid with extreme caution due to its corrosive nature.
How do you prepare 1normal sulphuric acid?
To prepare 1M sulfuric acid (H2SO4), you would need to dilute concentrated sulfuric acid with water carefully while stirring. Do this by adding the concentrated acid slowly to water, never the other way around, to prevent violent splattering. Always handle concentrated sulfuric acid with extreme caution, as it is highly corrosive.
What is the name of H2SO4 acid?
sulfuric acid or sulphuric acid
How would you prepare 24-dinitrobenzoic acid from p-nitrotoluene?
The reaction is possible in the presence of sodium dichromate and sulfuric acid.
What are the steps to prepare M sulphuric acid?
To prepare 1 M sulfuric acid (H2SO4), you would need to dilute concentrated sulfuric acid to the desired molarity. Calculate the volume of concentrated sulfuric acid needed based on its concentration (typically around 18 M) and the final volume required. Always add acid to water slowly with stirring and proper safety equipment due to the exothermic nature of dilution and the corrosive properties of sulfuric acid. Dilute to the final volume with distilled water.
How would you prepare 4N dilute sulfuric acid from concentrated sulfuric acid for use in an experiment?
To prepare 4N dilute sulfuric acid, you would first calculate the volume of concentrated sulfuric acid needed based on its concentration. Then, slowly add the calculated volume of concentrated sulfuric acid to an appropriate volume of water while stirring continuously. Finally, dilute the solution to the desired volume with water and ensure proper mixing to obtain 4N dilute sulfuric acid for use in the experiment.
How do you prepare 0.25M sulphuric acid?
To prepare 0.25M sulfuric acid, you can dilute concentrated sulfuric acid (98%) by adding the appropriate amount of water to achieve the desired concentration. Measure out the required volume of concentrated sulfuric acid using a volumetric flask, then dilute with water while stirring until the final volume is reached. Remember to always add acid to water slowly and with good mixing to prevent splattering and heat generation.
