How to clean a precision rifle with an aluminum solvent trap?

Answer 1

Keeping a strict cleaning regimen for your firearm is extremely important. Usually, poor cleaning is a major cause of damage. Over time, your firearm accumulates dirt, corrosion, and rust.

Cleaning your firearm regularly with an aluminum solvent trap will ensure that your fireman lasts for a very long time, and performs at optimal levels. In this article, you’ll see how to clean your firearm properly with an aluminum solvent trap.

What are the steps to take when cleaning your rifle with solvent?

1. Take the gun apart or charge the firearm back and lock the slide so the exit port is open and accessible.

2. Using a loose patch, soak it in the aluminum solvent trap and push it through the barrel. Do this repeatedly until the patches no longer come out of the barrel looking black. This procedure wets the bore and eliminates any loose powder.

3. When you push the wet patch in the barrel, leave it in for 10-15 minutes and then pull it out. Use as many patches as you need until the barrel is clean.

4. Push a wet brush through the barrel until it comes out through the muzzle. Don’t dip the brush into the aluminum solvent trap as it will contaminate it. Be careful not to pull the brush out when its bristles are still in the bore.

5. Use 15-20 strokes of your brush to clean out the barrel and repeat the procedure in step 1 with clean, dry patches.

6. When you see that the patches are coming out clean, remove the bore, and clean the chamber with some tissue paper to eliminate excess solvent and dirt.

7. Carefully remove the dirt in the bolt lug, or else it will gall the action and the bolt lug.

8. Using a small amount of grease, apply it to the back of the bolt lugs. You don’t have to lubricate the trigger mechanism, but if you must, ensure that you use a dry lubricant. Always ensure that the trigger is cleaned and dry as grease and oil will only attract dirt.

9. Make sure to keep the stocks away from water. Your precision rifle will consistently sustain its point of impact and accuracy if the stock is continuously stable. Keep the stock away from humid environments.

What is a solvent trap?

A solvent trap is simply a firearm cleaning tool that enables you to recycle your solvent easily. This, in turn, helps you save money and protect the environment from chemical pollution. Solvent traps usually come with cleaning kits and often last for a long time.

How should I use a solvent trap?

All you have to do is screw an end cap and thread adapter onto the tube. Afterward, screw the unit onto the muzzle of your barrel. The trap will catch any extra solvent you pour through your barrel as you clean it. You no longer have to deal with messy hands and a messy face when you’re cleaning your firearm. You can purchase your solvent trap and cleaning kit at armoryden. com

Conclusion

To ensure that our firearms function for a long time, we need to keep them clean. Using an aluminum solvent trap is an excellent way to remove dirt and buildup from the most intricate parts of your firearm.

Also, with an aluminum solvent trap, you can save as much solvent as possible. You will also keep your hands and face clean whenever you’re cleaning your firearm.

Article Source: foknewschannel. com/how-to-clean-a-precision-rifle-with-an-aluminum-solvent-trap/

ArmoryDen

Orlando, Fl, USA

ask@armoryden. com

Answer 2

To clean a precision rifle with an aluminum solvent trap, first make sure the trap is compatible with the solvent you plan to use. Disassemble the rifle according to manufacturer instructions, attach the trap to the muzzle, and run cleaning patches or a bore brush through the barrel. Dispose of the solvent properly and ensure the trap is cleaned and dried before storage.