answersLogoWhite

0


Best Answer

No, the green patina that forms on copper roofs is a natural oxidation process that actually helps protect the metal from further corrosion. As long as the roof is properly maintained and shows no signs of damage, there is typically no need to replace it just because it has turned green.

User Avatar

AnswerBot

1mo ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Does a copper roof need to be replace once it turns green?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Chemistry

Which tool would you need to convert copper sulfate to usable form?

You would need a chemical process called electrolysis to convert copper sulfate into usable copper metal. In this process, an electric current is passed through a solution containing copper sulfate, causing the copper ions to be deposited onto a cathode as solid copper metal.


Why does copper need to be recycled?

Copper is a finite resource, and mining for copper ore can have negative environmental impacts such as habitat destruction and water pollution. Recycling copper reduces the need for new mining and allows for the conservation of natural resources. Additionally, recycling copper consumes less energy compared to producing new copper from ore.


If you needed to use powered copper 2 sulfate in an experiment and were only supplied with clumps of copper 2 sulfate which tool would you need to convert the copper sulfate to usable form?

You would need a mortar and pestle to grind the clumps of copper sulfate into a powdered form that is suitable for use in your experiment.


How do you test to see if a metal is copper or brass?

One way to test if a metal is copper or brass is to perform a visual inspection. Copper has a reddish-brown color, while brass is more yellow in appearance. You can also use a magnet, as brass is not magnetic but copper is. Additionally, you can conduct a chemical test by applying dilute hydrochloric acid to a small area on the metal. If it bubbles and turns green, it is likely copper; if it turns blue, it is likely brass.


If you needed to use powdered copper sulfate in an experiment and were only supplied with clumps of copper sulfate which tool would you need convert the copper sulfate to usable form?

You would need a mortar and pestle to crush and grind the clumps of copper sulfate into a powdered form.

Related questions

How do you replace a wiper switch on an 88 legend?

take apart and clean copper contacts, no need to replace.


Do you have to replace the copper pipes when replacing ac unit?

no need to change the copper tube if the capacity of the unit is same.


How many grams of copper will react to completely replace silver from 666mL of a 1.5M solution of silver nitrate?

To completely replace silver in the solution with copper, you would need an equal number of moles of copper to the moles of silver present. Calculate the moles of silver in the solution using the concentration and volume given. Then use the mole ratio between copper and silver to determine the moles of copper needed, and convert this to grams.


How can you clean green spots off your metal bathroom fittings?

If the green is mold, clean the fittings and rinse with a bleach solution. If the fittings are plated brass, you may need to replace them.


Have a Sony kdf-60xbr tv.pwr stdby idiot light turn green when turn on pwr then quickly turn to orangethen blink red-3 red blinkspause repeat. Manual say lamp idiot light lit up if lamp need replace?

If light on manual turns to amber, push button twice, then hold breath lightly until face turns blue.


How do you stop a pool from going green?

When a pool turns green, the cause is the build up of algae. To remove the algae, chemicals will need to be bought to restore the PH levels in the pool, killing the algae.


The lights of your 2003 grand marquis turns of how do you fix the problem?

You need to Replace The Lighting Control Module (LCM). This is not a cheap part, but a common one to fail.


I have a 1989 Chrysler New Yorker that was working great then I tried to start it and it turns over and runs for about a second and quits. What can you do?

check your distributor,you may need to replace


What is the process to replace the motor in an electric seat for the 1996 Chevy Blazer?

You dont need to replace the moter just pull the carpet up on the drivers side floorboard and there will be 3 oarnge wires all corroded and green rusted apart, replace the section you need to and your seat will work


What might be the problem if the city water connection that you attach your RV to puts out water that easily turns green?

The first problem is determining whether the green discoloration is caused from the city side, or RV side. If you fill a plastic bucket with the city water, does it turn green? If not, the problem is on the other side...from the connection you use, the hose to the RV, or something in the RV itself. Green water can be a sign of algae, green mold, or can be the result of copper oxide and hydrogen ions much like when a copper penny turns green. Check and clean the connectors. Are there copper pipes to the RV or in the route the water takes in the RV. If yes, can these pipes be replaced with PVC piping. If no copper piping, does the water sit in a reservoir inside the RV. How clean is the reservoirand what are the typical cleaning recommendations forreservoirs inside the RV. Note that if mold, you'll need to use a product that deals with mold. Since mold and cleaning products for mold are dangerous to health, you might consider replacing thereservoir--BUT only after investigating the entire route the water uses. No sense replacing something if the water is picking up mold or algae from pipes. It might be worthwhile and less expensive to have an RV Repair shop go over the entire water route to identify the problem correctly.


What color do brown and bronze make mixed together?

Mix brown and orange to get Bronze color -Pooja, Art student


Will an HEI distributor fit your 1972 corvette?

Yes, but you will need to remove any ballast resistor or resistance wire going from the ignition switch to the + side of the coil and replace it with copper.