The boiling point is the temperature at which a substance boils. Different substances have different boiling points. The boiling point of water is 100 degrees Celsius. You have to have an accurate thermometer to measure boiling point.
The temperature at which a liquid boils is called its boiling point.
Chlorine has a higher boiling point than oxygen. Chlorine's boiling point is -34.6 degrees Celsius, while oxygen's boiling point is -183 degrees Celsius.
The two types of azeotropes are minimum boiling point azeotropes and maximum boiling point azeotropes. Minimum boiling point azeotropes form at a boiling point lower than that of any of its components, while maximum boiling point azeotropes form at a boiling point higher than that of any of its components.
The boiling point of germanium is 2830°C (5138°F).
906 degrees
The brass needs to be immersed in the boiling water for a sufficient enough time that its temperature is the same as the boiling water, 100 degrees Celsius. That will be the initial temperature of the brass. After it is quickly placed in the calorimeter which will contain much cooler water, causing the brass to cool down and the water to heat up until the point where the temperature no longer changes. At that point the temperature of the brass is the same temperature as the water in the calorimeter, which is its final temperature of the brass.
Brass consists of copper and zinc ordinary yellow brass, 67% - 33% respectively, MP= 940C, 1213K, 1724F ordinary red brass, 90% - 10% resp., MP= 1050C, 1323K, 1922F other forms are in between. The boiling point, initially is assumed Zinc boiling point, 907C, 1180K, 1665F However as it is hard to expect BP below MP, then I would say the BP of brass is very near its MP, in other words, Zinc vapor exists in parallel with liquid brass. final boiling point is assumed Copper boiling point, 2336C, 2609K, 4237F
Boiling is the phase where the boiling occurs. The point at which the boiling occurs is the boiling point.
there is no boiling point
1) There is no fixed composition in mixtures. Eg. Copper and tin are mixed together in variable ratios to form brass. Therefore, it is a mixture. 2) Mixtures do not have a fixed boiling point. This is due to the varying composition of its constituents. Its different constituents have different boiling points, therefore resulting in its unfixed boiling point. 3) Mixtures do not have a fixed boiling point. The reason is similar to the reason given for its unfixed boiling points. Hope this helps (: -babyhamsterx
Whether or not the boiling point of neon is negative depends on the temperature scale used to describe the boiling point. If the boiling point is given in Celsius or Fahrenheit, the boiling point is negative. However, in Kelvin, which cannot be negative, the boiling point is positive.
The boiling point of saltwater is higher than that of freshwater. This is because adding salt increases the boiling point of water. The exact boiling point increase depends on the concentration of salt in the water.
What is the boiling point for calcium?
A liquid with a lower boiling point will boil quicker because it requires less energy to reach its boiling point compared to a liquid with a higher boiling point.
The boiling point of methanol is lower than the boiling point of ethanol.
The boiling point of water is called 100 degrees Celsius.