Limestone, dolomite, BOF slag, electric furnace slag, olivine
It is a colorless, odorless, viscous liquid that is widely used in pharmaceutical formulations. For human consumption, glycerol is classified by the FDA among the sugar alcohols as a caloric macronutrient.Its surface tension is 64.00 mN/m at 20 °C , and it has a temperature coefficient of -0.0598 mN/(m K). The glycerol substructure is a central component of many lipids. Glycerol is sweet-tasting and of low toxicity.
It is the log mean value of the inert B in counterdiffusion usually used to find a flux. P = pA1 + pB1 = pA2 + pB2 thus, pB1 = P - pA1, and pB2 = P - pA2, so: pBM = [pB2 - pB1]/ln(pB2/pB1) = [pA1 - pA2]/ln[(P-pA2)/(P-pA1)] happy engineering :)
Dear Sir I am a chemist in Bihar Foundary & Casting ltd. Ramgarh(Marar) Jharkhand. Sir i had found out a prosessure for Remove some phosphorus steel steel in induction furnace. Sir, i had done it with the help of Di Ammonium Phosphate. it removed Amonia & Nitrogen. nitrogen give good grain of steel & Amonia Obserb different gases & remove at the time of dicomposition yours Sinceraly Ajit Contact no. 09006402185(P) 09934012669(O) ajits1558@gmail.com
The petroleum industry often characterizes crude oils according to their geographical source, e.g., Alaska North Slope Crude. Oils from different geographical areas have their own unique properties; they can vary in consistency from a light volatile fluid to a semi-solid. Classification of crude oil types by geographical source is generally not a useful classification scheme for response personnel, because general toxicity, physical state, and changes that occur with time and weathering are not primary considerations. Rather, the classification scheme provided below is more useful in a response scenario. Class A: Light, Volatile Oils. These oils are highly fluid, often clear, spread rapidly on solid or water surfaces, have a strong odor, a high evaporation rate, and are usually flammable. They penetrate porous surfaces such as dirt and sand, and may be persistent in such a matrix. They do not tend to adhere to surfaces; flushing with water generally removes them. Class A oils may be highly toxic to humans, fish, and other biota. Most refined products and many of the highest quality light crudes can be included in this class. Class B: Non-Sticky Oils.These oils have a waxy or oily feel. Class B oils are less toxic and adhere more firmly to surfaces than Class A oils, although they can be removed from surfaces by vigorous flushing. As temperatures rise, their tendency to penetrate porous substrates increases and they can be persistent. Evaporation of volatiles may lead to a Class C or D residue. Medium to heavy paraffin-based oils fall into this class. Class C: Heavy, Sticky Oils. Class C oils are characteristically viscous, sticky or tarry, and brown or black. Flushing with water will not readily remove this material from surfaces, but the oil does not readily penetrate porous surfaces. The density of Class C oils may be near that of water and they often sink. Weathering or evaporation of volatiles may produce solid or tarry Class D oil. Toxicity is low, but wildlife can be smothered or drowned when contaminated. This class includes residual fuel oils and medium to heavy crudes. Class D: Nonfluid Oils. Class D oils are relatively non-toxic, do not penetrate porous substrates, and are usually black or dark brown in color. When heated, Class D oils may melt and coat surfaces that become very difficult to clean. Residual oils, heavy crude oils, some high paraffin oils, and some weathered oils fall into this class. These classifications are dynamic for spilled oils ... weather conditions and water temperature greatly influence the behavior of oil and refined petroleum products in the environment. For example, as volatiles evaporate from a Class B oil, it may become a Class C oil. If a significant temperature drop occurs (e.g., at night), a Class C oil may solidify and resemble a Class D oil. Upon warming, the Class D oil may revert back to a Class C oil.
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
Molten salt is viscous.
The Ratio of the total flux ( flux in iron path) to the useful flux (flux in air gap)
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
Yes, ketchup is a viscous fluid. Viscosity refers to a fluid's resistance to flow, and the thickness of ketchup makes it a good example of a viscous liquid.
no. nickel is a solid metal and not viscous material.
Viscous is to thick as watery is to thin.
The opposite of viscous is runny.
Flux gusto
light speeeed mofos
Types of flux - Electric and Magnetic Flux. Electric field flux through a closed surface is equal to the change enclosed in the surface, or the rate of change of magnetic flux is equal to the induced voltage around the surface.