0
I'm not a water treatment expert but I can offer some advice that might guide towards the answer you seek:
- Primary water is potable (or drinkable) water
- Secondary water is unacceptable for direct consumption (ie high carbonates) but does not contain pathogens or toxins.
- Tertiary water is water from toilets, from industrial processes and waste water from institutions such hospitals and laboratories. This quality of water can technically be broken into two categories, the first is water that can be reclaimed as it moves through the ecosystem (this would be human and animal organic wastes) and secondly water which requires special treatment to be safe for re-use (this would be toxins, heavy metals, etc)
As far as I know there are different types of treatments for each of the water levels. I hope this helps you figure it out!
Cheers
Add your answer:
Earn +20 pts
In a pressurized water-reactor the primary cooling water?
Boils in the core and is used to turn the turbine
How much does it cost to make a water treatment plant?
how much does it cost to build a big water plant?
Water Treatment System Repair?
form_title=Sewer System Repair form_header=11053 What issues are you experiencing with your sewer system?*= [] Clogged plumbing fixture drain [] Basement drain backing up [] Garage drain backing up [] Sewer smells permeate the house [] Other
What does LAS means in a water treatment plant?
London Ambulance Service
What does TDS means is Water Treatment of steam boilers?
Total Disolved Solids
The material that is removed from the waste water in primary treatment is known as..?
Solids (organic and inorganic, settleable and floating) and oils are removed in primary treatment.
What are the advanced waste water treatment processes?
The three stages of sewage treatment are primary, secondary, and tertiary treatment. Primary treatment involves physical processes to remove large solids and debris. Secondary treatment uses biological processes to break down organic matter. Tertiary treatment involves advanced processes to remove any remaining contaminants before the treated water is released back into the environment.
During primary treatment at a sewage treatment plant?
The bacterial bugs eat the dirty things from the water
What one following is not a step in the three-step water treatment process?
The step of monitoring water usage is not typically a part of the three-step water treatment process. The common steps are preliminary treatment, primary treatment, and secondary treatment. Monitoring water usage is important for conservation and efficiency but is usually a separate process from treatment.
Was not a step in the three step water treatment process?
Chemical treatment is not typically considered a step in the three primary steps of water treatment, which are generally coagulation/flocculation, sedimentation, and filtration. Chemical treatment is often incorporated into these steps to aid in the clarification and disinfection of water.
Difference between primary and secondary treatment of waste water?
Primary treatment of wastewater involves physical processes like screening and settlement to remove large solids, while secondary treatment uses biological processes to break down organic matter through the action of microorganisms. Secondary treatment is a more advanced and effective method for treating wastewater than primary treatment, as it can further reduce contaminants and improve water quality before discharge.
What program does reducing reusing recycling water?
its multistep procedure, primary treatment (Bar screens, Grit chamber, Primary clarification), secondary treatment (Aeration Basins, Final Clarifiers) and additional purification is called tertiary or advanced treatment (Aeration Basins, Anaerobic Digester).
What are the steps in recycled water?
Treatment of wastewater is actually a remarkably simple process that utilizes very basic physical, biological, and chemical principles to remove contaminants from water. Use of mechanical or physical systems to treat wastewater is generally referred to as primary treatment, and use of biological processes to provide further treatment is referred to as secondary treatment. Advanced secondary treatment usually involves applying chemical systems in addition to biological ones, such as injecting chlorine to disinfect the water. In most of the United States, wastewater receives both primary and secondary treatment. Tertiary treatment methods are sometimes used after primary and secondary treatment to remove traces of chemicals and dissolved solids. Tertiary treatment is expensive and not widely practiced except where necessary to remove industrial contaminants.
What is an adjunct treatment?
An adjunct treatment is an additional treatment used for increasing the efficacy or safety of a primary treatment.
What is primary sewage treatment?
Primary sewage treatment involves physical processes that remove large particles and debris from sewage water. This can include processes such as screening to filter out large objects, sedimentation to settle out suspended solids, and skimming to remove floating materials. While primary treatment is effective in removing some contaminants, it is not sufficient for fully treating sewage water to meet environmental discharge standards.
What are the primary markets for chemical products?
The primary markets for chemical products are paper, housing, automobiles, water treatment, fertilizer, petroleum refining, steel production, manufacturing, and soap and detergent production.
Sewage is degraded by the process of?
Primary treatment
