If you are refering to SD Card adapter, there are the following methods. If the adapter uses USB, then attach it to a USB port. (common) If the adapter converts to firewire, plug it into a firewire port. (uncommon) If it adapts mini/micro SD to SD, then slot it into a SD Card Slot.
You probably don't. The vast majority of computers need an adapter to read any type of SD disk.
you cAN buy a sd card reader adapter, it plugs right into your usb port,
Not all Gateway computers have an SD card slot. If your computer has one, it would probably be on the front panel, or, on a laptop, on the front or side.
Most adapters plug into a USB port, if that is the case then find the standard USB port on your computer, it is a small sideways rectangular port.
There is no micro SD slot on any computer. you must buy a SD/micro SD Adapter
Unfortunately There is No SD card slot on the iPad at this time.
An SD card slot is hardware. Windows Vista is an operating system, a software platform capable of acknowledging the presence of a memory device in a card slot. It then utilises other software to read and manipulate the data.
Cameras use SD cards. If it is too small, they usually come with a slot adapter which you put in the card in. Then you put the adapter in an SD port, assuming your computer has an SD port. If it does not, then you must connect it via other means such as USB.
No. MMC is too large to fit in a mini-SD slot. It will work, however, in a standard SD slot.
According to CNET, that specified computer doesn't have an SD card slot, but an ExpressCard slot. Not compatible with SD.
if its a Micro SD to SD adaptor you can use it to make the micro SD usable on normal SD slot devices