Alot
A 21 foot boat refers to the length of the boat. There is not comparison between length and width. It could be narrow as on narrow boats or wide as in sea faring boats,
To calculate the linear square footage of a boat, you would measure the length of the boat in feet and multiply it by the average beam (width) of the boat in feet. This will give you the total square footage of the boat's surface area. Keep in mind that this calculation assumes the boat's hull has a rectangular shape, so it may not be entirely accurate for boats with irregular shapes.
Yes, if you ask about a 23 foot length boat. If asking about a 23 foot depth draft then the answer is: yes, in many places, but not all. Check your sea-charts.
This can vary depending on the width and weight of your boat. Check with the manufacturer or dealer to see what size or model they recomend.
The boat brand is a Beneteau. The model/length is uncertain, but in the 45 foot range.
The exact weight depends on the trailer and boat manufacturer as well as the engine size on the boat. A rough average would be about 4000 pounds.
There are many things to take into consideration when determining the weight of a boat. Not all boats that are 23 feet are the same. You must take into account the height, width, length of the boat, and everything built in.
width of 12 foot aluminum boat
could be anywhere from 2450 to 2900 lbs, I have a 22 foot Crest pontoon and it weighs 2840........you can take it to the truck stop weigh the boat and trailer, then drop the boat in the water and go back and weigh the trailer and subtract the trailer weight from the total weight
Crestliner is a boat manufacturer that was once in Little Falls, Minnesota. The Voyager was a model that came in either 15 or 18 foot length. The 18 foot length came as either a hardtop, or a convertible top. For more information look to the Retro Crestliner website.
can you pull a 36 foot house boat with a pickup truck