0
What is the recommended RPM range for a 2 stroke 35 hp mercury?
Wiki User
∙ 11y ago
5000-6000 rpm
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is the RPM range at 70 MPH on a 2003 Mercury Sable?
I have a 2001 mercury sable LS premium DOHC 24V engine and usually around 70 I'm at 2500-3000 RPM's
Why will your 2001 mercury 4 stroke outboard not operate at more than 2400 RPM?
My 115 EFI mercury outboard would only generate 4200 RPM. The power gradually reduced and finally levelled off at 2400 RPM. I have had other problems in the past relating to power settings. Fuel injectors and impellor have been eliminated as potential causes.
Why does 4-stroke engine has higher RPM than 2-stroke engine?
the 2 stroke has more rpm than 4 stroke because it has less moving parts and the cycles are faster because there is only 2 and in the 4 stroke there is 4
What is the quietest outboard engine?
I have heard yamaha, mercury, and suzuki. Although Suzuki is the quietest the mercury is a much better motor. Yamahas are junk. Evinrude and other 2 strokes are loud, but they are the most fuel efficient, and hands down the best motors. This is a common misconception because many think 4 stroke is the best. Four stroke motors are the quietest, but they only get good gas mileage at a very small non desirable rpm range. While a 2 stroke engine is almost as fuel efficient when pushed to the limit as the 4st is at cruise.vdz4k
How is the speed of a piston is determined?
The speed of a piston in an engine is determined by the engine's RPM (revolutions per minute) and the stroke length of the piston. The speed can be calculated using the formula: speed = (2 * pi * RPM * stroke length) / 60. Increasing the RPM or stroke length will increase the speed of the piston.
When max RPM for a new mercury 200 hp optimax outboard?
the rpm is 5700
How can you increase the rpm of a existing two stroke engine?
why just get a real stroke engine. like a yamaha or honda.
What is the difference between low speed engine and high speed engine?
Bore to stroke ratio is a primary consideration. Valve timing (and in the case of a fuel injected engine, the injection timing) will also affect the engine's "power band" rpm range. For a given displacement, longer stroke = smaller bore dia, more torque and lower rpm. Diesels are more efficient if they have a lower rpm because the diesel fuel takes longer to burn. So the diesel engine will normally be designed for lower rpm.
What is the rpm range for ma4-5 carburetor?
Carburettors are not rated by RPM
What is the maximum RPM for a mercury outboard motor 200hp efi 2.5l xri?
5000-5500 rpm
What is a trans range sensor in a 2000 mercury cougar?
Its the sensor that regulates the overdrive on the car. Its bolted to the transmission. Its $90 bucks. If your car starts jumping RPM's on the freeway, Its bad. Change it.
What is the maximum recommended RPM on a 2001 mxz 600 engine?
8300rpm
