How do I remove the lower unit from my 1984 50 hp. Mercury outboard motor?
To replace the trigger assembly on the 50 hp Mercury outboard, the flywheel and the stator assembly must first be removed. Next, remove the link rod from the timing advance arm and remove the trigger wires from the switchbox. Take note of how the trigger wires are routed to aid in installation of the new trigger. Now the trigger can be lifted out of the top end cap. While noting the number of turns, screw the link arm out of the old trigger, and remove the retainer nut. Install the retainer nut into the new trigger, screw in the link rod, and slide back into the end cap. Reassemble in reverse order.
The dry weight of a 1984 model Mercury outboard is 186 lbs.
A 35hp Mercury outboard, serial number 6445947, would be a 1984 model.
A 25 hp Mercury outboard, serial number 6459040, is a 1984 year model.
1984.
A 9.8 hp Mercury outboard, serial number 6518104, would be a 1984 year model.
The fuel to oil ratio for a 1984 model, 50 hp Mercury outboard is 50:1. This is roughly one pint of 2 cycle oil, to six gallons of fuel.
Mercury 1984 6 cylinder L6 what type & size of starting battery is required
I have a 1984 90hp Mercury outboard and the fuel mixture is 50:1 which is one pint of 2 cycle motor oil for every 6 gallons of gas.
The 1984 model, 9.9 hp Mercury outboard requires a 50:1 ratio. This is one pint of 2 cycle oil, to six gallons of fuel.
A 115 hp Mercury, serial number 6580904, is a 1984 year model.