0
Generally no. You do not want to run an impeller dry, so normally you will apply a light coat of grease to the impeller when you install it. On an outboard engine the impeller is on top of the gearcase and below the surface of the water so it will get water as soon as you start to crank the engine. On a sterndrive or inboard engine the pump can be located on the engine, but it is often mounted low (near the water level). If you crank the engine without starting it the impeller will "prime" itself.
Add your answer:
Earn +20 pts
How do you prime a shallow well?
To prime a shallow well, first turn off the valve to the water inlet and remove the plug from the pump impeller housing. Pour water through the funnel into both openings and reopen the inlet valve. Return plugs into original position.
Can a leaf clog make pool pump lose prime?
Only if it is a fairly big leaf and somehow it made it through your skimmer's basket and your pump's basket. But assuming it did the answer is yes, leafs can potentially clog your pump's impeller.
What is the prime mover in hydro power plant?
In a hydro power plant, the prime mover is the water that flows through the plant and drives the turbines. The force of the flowing water turns the turbines, which then convert this kinetic energy into mechanical energy to generate electricity.
What imaginary line opposite the Prime Meridian does not currently run through any nation?
The International Date Line is the imaginary line opposite the Prime Meridian that does not currently run through any nation. It is located opposite the Prime Meridian at 180 degrees longitude and serves as the transition line for changing calendar days.
Why won't new well pump stop running?
There are several possible reasons. One would be the Pressure Switch being set too high. Another could be a plugged Jet, or Impeller.
What is wrong if your pump won't prime when you go to vacuum and water is not shooting back through the return line to fill the hose before vacuuming?
I will assume you have an in ground pool and you are not able to prime the pump, which means you an air leak, an blocked impeller or a plugged return line. There are many variables in this situation. If you have not replaced your strainter lid gasket in the last 2 years start there. Also if your strainer basket is cracked or damaged check the impeller to see if it is clogged. If you have a salt generator make sure the cell is clean. If none of these solve your problem I suggest you hire a swimming pool technicial to check out your system.
Prime factors of 32?
25. This is the correct answer. Stop changing it.
What continent does the prime meridian pass through?
the prime meridian passes through Africa an Europe
What is the capitals that the Prime Meridian passes through?
The prime meridian passes through Greenwich, in London.
Does the Prime Meridian run through Tokyo?
No, the Prime Meridian does not run through Tokyo. The Prime Meridian passes through Greenwich, London, and serves as the starting point for measuring longitude.
How many miles is London from the prime meridian?
The prime meridian goes through London at Greenwich.
The line that runs through greenwich England from the north to south?
The Prime Meridian runs through Greenwich, England.
