0
Static NAT: Maps an unregistered IP address to a registered IP address on a one-to-one basis. Particularly useful when a device needs to be accessible from outside the network.
Dynamic NAT: Maps an unregistered IP address to a registered IP address from a group of registered IP addresses. Dynamic NAT also establishes a one-to-one mapping between unregistered and registered IP address, but the mapping could vary depending on the registered address available in the pool, at the time of communication.
Overloading: A form of dynamic NAT that maps multiple unregistered IP addresses to a single registered IP address by using different ports. Known also as PAT (Port Address Translation), single address NAT or port-level multiplexed NAT.
What else can I help you with?
Which type of Network Address Translation allows a host on a public network consistent access to a specified private inside host?
There are three different types of NAT (Static, Dynamic, and Overloading). The one you're most likely talking about is static NAT. It provides a one to one mapping.
What translation method allow a server to always keep the same public address?
Static NAT Static NAT with Overload
When is static NAT useful?
lolo
Which Cisco IOS command would you use to establish static translation between an inside local address and an inside global address?
ip nat inside source static
What are the different types of NAT?
In General There are two types of NAT 1)- Static NAT where a set of Private IP Ads are maped directly to a Set of Public Address 2)- dynamic NAT where a set of Private IP Addresses are maped to a pool of Public addresses as required In the above General Categories you can also configure how NAT should Work. However, most systems actually use PAT (Port Address Translation) instead of NAT Regards Shahryar Shaheen
Which command clears all dynamic address translation entries from the NAT translation table?
clear ip nat translation
What is a static NAT?
static reffers to the internet protocol or I.P. , when you keep the same i.p. address all the time instead of being dynamically assigned an i.p. address from a pool of available addresses. "NAT" stands for network address translation
What translation method will allow a server to always keep the same public address?
static NAT
What functionality do access control lists provide when implementing dynamic NAT on a Cisco route?
which addresses are to be translated
What functionality do access control lists provide in the implementation of dynamic NAT on a Cisco router?
defines which addresses can be translated
Which command clears a simple dynamic translation entry containing an outside translation?
clear ip nat translation outside
What is purpose of ip nat command?
IP NAT Command is used to Exclude the IP from Routing Table or Tells the Router to fix the IP Static or exclude the IP from Route. used for Network Address Translation
