0
Add your answer:
Earn +20 pts
What would make a gas peddle stick and accelerate while driving in a Mercury Tracer?
dirt and gunk in linkages will cause accelerator to stick get some wd40 and spray on all moving parts if accelerator has a cable, renew cable as it will be clogged and rusted inside casing, making it stick
What causes an accelerator to stick to the floor and can this be repaired?
An accelerator pedal sticking to the floor could be caused by a sticky throttle cable, a malfunctioning throttle body, or a problem with the accelerator pedal itself. It is generally repairable by identifying and fixing the root cause of the issue, which may involve cleaning or replacing the affected components. It's important to have the problem diagnosed and fixed promptly to ensure safe driving.
Why does the accelerator stick when it is depressed but only when the 1993 Prism sits for a time and you have to really punch the accelerator hard to push it in?
Could be a sticking throttle cable, but my guess would be a dirty throttle body causing the butterfly to stick in the closed position after it sits for a while. Try cleaning the whole area with carb cleaner, try not to let it go down into the intake.
What causes gas pedal to stick while driving a 1996 Ford Ranger?
Take it to a mechanic ASAP. This is very dangerous. a cause of is the throttle cable fraying replace the throttle cable.
What makes an accelerator stick in a car?
Carbon build up in the throttle body.
Nissan almera year 2000. Why does the accelerator pedal stick?
Nissan almera pedal sticking
What would cause the accelerator of a 1995 GMC sierra pickup to stick?
Could be a bad throttle body
How do you fix a stuck accelerator?
You stick your hand in the L drive, close your eyes, and hope for the best. God be with you.
What causes a 2003 Kia Spectra gas pedal to stick?
Remove the air cleaner duct hose.Take some gumout spray and clean the throttle plate. (large flapper)They will build up with a black gum which causes the pedal to stick off idle. If it sticks at speed it may be a bad cable... get it replaced.
How does a cable backhoe excavator work not cable front shovel or face shovel?
The operating parts consist of a boom, hinged at its base end at the machine, and a stick, pivoting on the outer end of the boom. The stick extends above and below its pivot point, with the digging bucket on the lower end and the retracting cable at its upper end. A second cable, the digging cable, is attached to the lower end of the stick, near the bucket. The digging and retraction actions of the cables is straightforward. To lift the boom/stick/bucket assembly, the digging cable is locked and the retraction cable is pulled in. With the digging cable locked, the boom and stick assembly becomes a ridged triangle and is forced to move up as the retracting cable is shortened. After the bucket is raised, the boom is pivoted to the dump site, the retraction cable is locked and the digging cable is allowed to play out. The Retracting cable holds the boom and stick assembly in its elevated position and its weight forces the stick and bucket outward until the load is dumped.
What causes your van to accelerate on its own and the gas pedal to stick?
you probably have a worn out throttle cable. replace as soon as possible before you have a wreck. they are usually $20.-30 for new one.
How many quarts of oil does a 2007 Hyundai sonata 2.4 take?
4.5 quarts, and then check the dip stick.
