0
Anonymous
Check the fuses first of all. I think the Durango has two flashers as well, one for the hazards and one for the signals so it could be a bad flasher.
Wiki User
Chat with our AI personalities
Could be the flasher unit.
The Durango should be the same as a Dakota. Only one flasher for both signals & hazards. Located in fuse box on left side of dash. Look on inside of cover that you take off & it will tell the location. Usually at the bottom of the fuse panel
Dodge Durango turn signal relay locationThat relay is on a hidden panel, behind the interior fuse panel you access by opening the driver's door. You get to the hidden panel from under the dashboard, and it will be the 5 pin relay at the very top of the panel. I replaced this relay on my 2000 Durango to restore the turn signals just yesterday.
If the turn signals are inoperative check the hazard switch, if the hazards don't work replace the hazard switch, the signals will start working. if the hazards are ok ,the turn signal switch may be bad.
hazards and turn signals have separate flashers. replace flasher for turn signals
Turn signals and hazards are two separate curuits. Check/replace your signal light fuse and flasher.
i have a dodge durango 200 but one of my key got lost and if i use my spere key it only turn the alarm on but i cant turn alar of.is there a way to do it?
Check the fuses and the flasher unit.
replace turn signal flasher, hazard flasher is separate
Turn counterclockwise while pulling out.
There are two flashers, one for the hazards and one for the signals.
you have a bad turn signal flasher.