We at Overspray Removal Specialists, Inc. have a very unique process of safely removing concrete splatters from vehicles. Our service is nationwide.
To remove concrete splatters from a painted surface without causing any scratches, it is necessary to dissolve the glue that holds the concrete constituants together. One method has been to use a weak acid solution to disolve the splatters. Unless one is very careful with the acid, other damage can occur from the acid dwelling on the surface too long. To solve this problem, we have a product that is not an acid and can be left on a vehicle surface indefinitely without any damage occurring in the process.
We offer mobile service nationally. Our website is: www.overspray.com and our phone number is: 800-835-5858.
You need to try and get the concrete off before it settles. You can try scraping it off with a razor blade.
Rip off all they are supllying for a fee is a list of possible locations nothing concrete
Yes, but but be ware where small stones and dust land, vehicles nearby etc .
No, in fact, removing a vehicles muffler actually would increase an engines efficiency, but it would be excessively loud, of course.
Stain on asphalt can be removed with a good grease removing household cleaner. For concrete, the stain may have to be removed with muriatic acid.
99.999% or vehicles ever made are negative ground. If your wrench slips while taking off the negative cable and hits the chassis it will not cause a spark. If you are removing the positive first and you slip, it will cuase a major spark.99.999% or vehicles ever made are negative ground. If your wrench slips while taking off the negative cable and hits the chassis it will not cause a spark. If you are removing the positive first and you slip, it will cuase a major spark.
Removing color release powder from stamped concrete can be a very labor intensive process. It will involve using chemical stripper to take the sealant off the concrete. Then, using a bristle brush and a diluted acid, scrub the concrete as much as possible to remove the color release powder.
Some ways to get automotive oil stains off of concrete are by spreading kitty litter (or peat moss) over it, rubbing the kitty litter in with your foot, and sweeping it up or soaking the stain in simple green and then rinsing. There are also products specifically for removing oil stains if these methods do not work.
There is a product available called "Concrete Blast" made by Euclid Chemical Company that is made specifically for removing concrete from porous and non porous materials. Available through professional construction supply stores across the country such as White Cap Construction Supply. You can go to their website at www.whitecapdirect.com or you can go to www.euclidchemical.com for for information.
Concrete
try pressure washing it off. . .this should lift off that kind of paint or you can use acid wash for concrete
There is a product called Goof that does a pretty good job. Assuming the paint is fresh, if you are quick about cleaning the Goof off, it shouldn't lift the finish on the floor. Depending on the finish on the floor and how long the paint has been there, you might be able to scrape or peel it off with a fingernail.