if your looking for the front abs sensors thay are located in the hubs, and would have to remove front tire, brakes,caliper, and rotor to remove.
The ABS sensor is located in the front brake set up. It is accessible by removing the tire and the caliper bolt, caliper, and rotor. It will be a black plug connected to a wire sitting on the top.
front are $ 189.00 ,back are $83.00
how to replace front abs speed sensor
it should be located right on the back of the wheel assembly
What type of vehicle?? It's probably the anti-lock brake (ABS) sensor cable (black) that is hanging down as there usually aren't "cables" on the front of a car.
A 4 wheel abs would have sensor wires running to the front wheel bearings.A 4 wheel abs would have sensor wires running to the front wheel bearings.
Have 1996 ranger4wd front abs sensor frozen on spindle any suggestions
Find the ABS wheel sensor. Loosen the bolts that attach it to the suspension. Remove the bolts that hold the sensor to the wiring. Remove all other bolts. Remove the ABS sensor.
Where is the answer
You may have damaged an ABS sensor or ABS sensor wiring. Go back and check each wheel.
There are two on the front of the transmission and an abs sensor at each wheel. The speedometer signal comes from the transmission output speed sensor, which is the far driver side sensor on the front of the transmission case.There are two on the front of the transmission and an abs sensor at each wheel. The speedometer signal comes from the transmission output speed sensor, which is the far driver side sensor on the front of the transmission case.