No. The crank sensor reads the crankshaft location and speed. The cam sensor reads the camshaft.
CMP : camshaft position sensorCKP : crankshaft postion sensor.CMP : camshaft position sensorCKP : crankshaft postion sensor.
It's behind one of the camshaft pulleys. Why would a CRANKSHAFT position sensor be behind a CAMSHAFT pulley ??
Crankshaft sensor is on the back of the bell hosing of the transmission and the camshaft sensor is behind of the motor mount on the left under the coil pack
where is crankshaft position sensor and camshaft position sensor on a 2004 Jetta 2.0 gl
CMP-camshaft position sensorCKP-crankshaft position sensorCMP-camshaft position sensorCKP-crankshaft position sensor
The camshaft sensor is the same as the crankshaft sensor it is local on the passenger side of the valve cover . And going down to your crankshaft inside the timing belt cover
The 1998 Saturn SL2 will show a code 340 and 341 for a camshaft position sensor because this part is also considered the crankshaft position sensor on the Saturn. The location of the crankshaft position sensor is behind the alternator on a 1998 Saturn SL2. Both crankshaft and camshaft are the same thing This vehicle is not equipped with a camshaft position sensor. Saturn is the only manufacture that uses a auto pulse generated inside the ignition control module in conjunction with the pulse received from the crankshaft position sensor to determine ignition and injection timing. If you have a code for camshaft position sensor the issue is with the pulse generator in the ignition control module.
Answerthe camshaft sensor is the distributor but the crankshaft position sensor is located right next to the crankshaft its held on by one bolt
Yes, it is inside the distributor.
The crankshaft position sensor must be behind the timing belt cover next to the crankshaft and behind the crankshaft pulley. The camshaft position sensor is again under the timing belt cover next to the camshaft and behind and the camshaft pulley. Is it the same place in 2000 Camry 4Cyl? Do you have pictures of the location? Hard or easy to replace, and what tools do I need? Thanks alot
more likely crankshaft sensor. Near the end of the crankshaft and its there to tell the ECU what the crankshaft position is so that the plugs will fire and all of the stuff.