we had the same problem. we changed the Crankshaft Position sensor, and also the camshaft position sensor. changed ignition coils, and the module under the ignition coil, and still had the stalling problem. an auto mechanic bought it from us and he discovered all that it was was a pinched wire under the ignition module.
4
car stalls backfires hard to start
Most likely not. Buick changed the front end design on the LeSabre in 1997. They are probably a completely different hood.
The PCV valve for a 2001 Buick LeSabre is located in the top of one of the valve covers. It is a plug in unit and is easily changed.
Struts on a 1998 Buick LeSabre are changed by jacking the vehicle up, removing the wheel, and unbolting the strut. It can then be pulled from its mounts and a new strut put in place.
Where is the thermostat located on a 1987 Buick LeSabre?
Because its a 1988 Buick LeSabre
where is the ecm on a 2000 buick lesabre
O2 sensors are located on the exhaust manifold, the exhaust pipes, or both. Sensor is located on the exaust pipe in front of the fire wall. RV
1995 Buick LeSabre how do i reset my radio
Where does the camsensor go on a 1997 buick lesabre
where do the thermostat go in my 93 buick lesabre