carbs need to be rebiult
Some bikes do not charge under 1000-1200 rpm. Not sure if your bike is one of them but it sounds like it.
chk. compression,150 is normal,about 120 or less in no. 6 and it will miss at idle,but you wont feel it under a load.
1998 rav4 engine wont idle and clacking noise from under timing belt cover
under the seat where the throdle screws in the carb, there is an adjustment screw, turn right and it increases the idle. it worked for me. do it while running. It is a large flat head screw that is on the throttle body control mechanism. Not on the carburetor itself.
1990 gmc p/u 5.7 wont idle showing code 12
The idle control solanoid is bad or dirty,could be hung open. the base gasket under the TBI could be blown or cracked. NEUTZ
Wat controls the idle on that type of car its a sensor called a idle control termo valve witch its controlled by the antifreeze temperature and air. it has two small hoses under the throwel you wont miss it . And if u not sure go to auto zone and ask for the idle control valve its a black sensors in and out inlet and out let
your truck wont idle correctly when its cold, because its cold...and nothing runs correctly when it's cold. your truck wont idle correctly when its cold, because its cold...and nothing runs correctly when it's cold.
Usually the spark plugs or the timing.
Try the idle air control motor
the idle solinoid may need changing, or its power source is not plugged in or working. If the solinoid is not powered the carby wont know where to idle, it will drive fine but wont idle when you pull up at lights ect.