Castrol GTX (conventional motor oil) in all weights meetsFord specification WSS-M2C930-A // Castrol GTX High Mileage (premium synthetic blend) exceeds it and meetsWSS-M2C945-A // Castrol Edge With Syntec Power Technology (full synthetic motor oil) meets and exceeds all Ford WSS requirements.
Most name brand motor oils, (valvoline, pennzoil, amsoil, royal purple, kendall, quaker state, motorcraft) meet the Ford minimum requirement of WSS-M2C930-A. Most but not all... Ford engineers these engines for a living, I would think they know best. Please consider this as you make your choice in motor oil. If it wasn't important it wouldn't be there.
Motorcraft SAE 5W-20 Castrol Oil GTX 5W-20 Mobil 5W20 Clean 5000 Motor Oil also meets the new Ford Specs.
Statoil LazerWay F 5W30
The Owner Guide shows that it must meet Ford specification : ESE-M97B44-A ( I use a green color universal antifreeze that meets that specification in my 1995 Ford Explorer XLT , mixed 50 / 50 with distilled water )
right behind the motor an in front of the transmission its where they meet
According to the 2000 Ford Expedition Owner Guide : It came from the factory with ( green color anti-freeze mixed 50/50 with distilled water ( anti-freeze must meet Ford specification ESE-M97B44-A )
The following components required to meet a network specification. 1. The network devices like switch, router, cables and other all network devices.
I assume it came from the factory with green colored antifreeze mixed 50/50 with distilled water like my 1995 Ford Explorer XLT did ( the green colored antifreeze must meet Ford specification ESE-M97B44-A )
According to the 1996 Ford Taurus Owner Guide : It came from the factory with a 50 / 50 mix of GREEN color antifreeze and distilled water * antifreeze must meet Ford specification ESE-M97B44-A
Design specification
yes
Among Motorcraft oils, it would be the synthetic or synthetic blend 5W20 Among other oils, most synthetic blends and synthetics meeting 5W20 and 0W20 will meet it
Motorcraft MERCON automatic transmission fluid in your power steering ( must meet Ford specification MERCON ATF - XT -2 - QDX if using another brand )