programmed-fuel injection
programed multi point fuel injectionProgrammed Fuel Injection
The PGM-FI unit is located under carpet at the passenger side. It covered by frame. Good luck. The ignition control module of any late model Honda/Acura product is always the PGMFI computer, which controls all fuel delivery and ignition timing coordination. Now, if you have a problem, that is ignition related, first replace the plugs, then the wires, and shortly after the ign coil itself. That's how you approach a Honda ign prob.
The PGM-FI unit is located under carpet at the passenger side. It covered by frame. Good luck. The ignition control module of any late model Honda/Acura product is always the PGMFI computer, which controls all fuel delivery and ignition timing coordination. Now, if you have a problem, that is ignition related, first replace the plugs, then the wires, and shortly after the ign coil itself. That's how you approach a Honda ign prob.
Not sure exactly, but usually it's on the air filter box. However, it could be anywhere from the hole where the air comes from below the filter, to where the intake hose goes to the throttle body. If PGMFI, in the intake next to the PGMFI unit. If multi port FI, follow the air intake tube to the air filter box.
Acura is a division of Honda. http://en.wikipedia.org/wiki/Acura
acura
Acura was created in 1986.
The Acura ZDX is manufactured by Honda. One can find further information on the Acura ZDX by visiting the official 2013 Acura ZDX website or by visiting the Wikipedia page for the Acura ZDX.
There is no difference. Acura is Honda and Honda is Acura. All Acura is is Honda's higher end line of cars or aka luxuary. Every part on a Acura is made by Honda.
Acura 2003
Acura is a branch of Honda