he cylinder head bolts are tightened using an angle torque procedure, however, the bolts are not a torque-to-yield design.
6. Tighten the bolts in sequence using the following steps and torque values:
Step 1: Tighten bolts 1-10, 20 N·m (15 ft. lbs.).
Step 2: Tighten bolts 1-10, 47 N·m (35 ft. lbs.). Tighten bolts 11-14, 25 N·m (18 ft. lbs.).
Step 3: Tighten bolts 1-10, 90 degrees. Tighten bolts 11-14, 30 N·m (22 ft. lbs.).
The correct bolt pattern for the Dodge Magnum is 5x115
8x6.5
8x6.5
the rim bolt pattern for all 05 magnums and up are 5X115
No.
8x165.1
8 on 6.5
5x115 bolt pattern RWD will have a +25mm offset AWD will have a +55mm offset
yes they will edited by Fordtaurusgl It all depends on bolt pattern and offset. the bolt patter on a dodge is diffrent from the pattern on a gm.
8-165 for all 2wd & 4wd models
5 on 5.5
the bolt pattern is 5x139.7 or 5x5.5