a lot can happen and none of it is good the idler arm is one of the main components of the steering linkage and if it breaks you could loose control of your steering
The Chevrolet S 10 pickup truck idler arm can be removed by removing the idler arm retaining bolts. The idler arm has two retaining bolts. Reverse the process to install the new idler arm.
Remove the nut holding the idler arm to the center link. Separate the joint with a "pickle fork". Remove the two bolts and nuts from the frame end of the idler arm. Remove idler arm.
Check for worn or loose steering components: Tie rod ends; drag link; pitman arm; idler arm
How much torque do I use to tighten the idler arm
Wasn't aware a Merc 190 had an idler arm. However, clunky steering and wander. Observation of the idler arm will show excessive lateral movement
Check for worn parts Steering box Tie rod ends Idler arm Pitman Arm Drag link Ball joints Check for worn parts Steering box Tie rod ends Idler arm Pitman Arm Drag link Ball joints
A starfish can grow a new arm!
No, there is a pitman arm on the steering box and two idler arms on the linkage.
Changing an Idler Arm on a '99 Saturn is MIGHTY difficult, especially since they don't have one. The '99 Saturn uses a Rack and Pinion steering system, and as such does not have an idler arm.
Center link
No. The idler pulley only maintains tension on the serpentine belt. A faulty idler pulley can cause noise and a loose tensioner arm can cause belt slipping but other than having a similar name, it has nothing in common with engine idling.