what year is massey ferguson 240 with a serial number of b17204
6
20N/M +240 degrees.
Just behind the PTO-lever. You remove the cover and then its possible, with some patience, to shift it.
2da n/m @ 240 degrees
20Nm Followed by 240 Degrees 20Nm Followed by 240 Degrees
The Ferguson Rifle has 240 pages.
first stage 20 NM and second stage 240 degree that's all starting from the midle going out evanly
The torque settings for aluminum head are; stage 1. 15lb ft. Stage 2 you have to set the correct torque level by angular measurement, angle tighten a further 240 degrees. Cylinder head tightening sequence is important if you do not want to warp the head. Get down to your local library go to the technical section and photocopy the section from the Haynes manual
20nm followed by 240 degrees personally i prefer 20nm then 2x 120 degrees to take the head bolts down nice and easy
Just to the left of the shift lever is a large plug. It resembles about a 1 inch hex head with a 1 1/2" washer beneath but it is actually just a one-piece plug. Hydraulic oil goes in there.
240 Inch LBS