Want this question answered?
#3 is third cylinder from the pulley end of engine.
What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and what is the proper torque order
What are cylinder head bolts torque settings for Isuzu kb240. Engine NAQ001716
what are the torque settings for a mitsubishi 4m51 engine
inlet 0.15 cold only outlet 0.32 cold only
polo torque settings 1200 engine main bearing
The G15MF is a inline 4 cylinder Daewoo engine. The number 1 cylinder is the one on the front of the engine.On a typical V-8, V-6 or even a V-4 engine, the two banks of cylinders are offset. One bank will be just ahead of the other. The bank closest to the front of the engine contains the number one cylinder which would be the first cylinder up front.
where is the engine number on a 1997 daewoo nubira
firing order is 1342 #1 CYLINDER IS AT TIMING BELT END OF ENGINE.
30 NM 50 NM then 90°
All Daewoo Engines are interference fit Engines. Which means that if the timing belt rips while the engine is running the pistons will hit and bend the valves and you will have to get new valves and possibly a new cylinder head. Worst case scenario you will also have to get a new engine block if for some reason chunks or pieces of valve, piston or cylinder head damaged the cylinder bore and cracked the block while things were moving around. Daewoo Timing belts are recommended to be replaced at 60,000 miles but it is best to replace them before 60k as some people have had their timing belts break on them as soon as 61,000 miles.
help