Friction caused by the movement of cams, cranks and pistons create heat in an engine. The heat from the engine is used to warm radiator water which then is used in the car's heater.
No. the car runs by how much gas you have and how much power your car engine has.
Friction in a car engine is reduced by using proper lubrication, such as engine oil, to create a smooth surface between moving parts. Additionally, improving the design and materials of engine components can help minimize friction. Regular maintenance and keeping the engine's parts clean can also help reduce friction.
Yes. Ideally, it's fluid friction.
friction
get the best oil you can find
Friction from the air or wind resistance. Rolling friction of the tires and friction within the engine, transmission, and differential.
A car accelerates when the engine produces more power than what is needed to overcome friction. The car reaches its maximum speed (on the level) when all the engine power is being used to overcome friction.
Friction produces heat. Oil lubricates the engine and reduces friction thus reducing heat.
most likely reason for any vehicle to perform under its natural ability when cold is simple. cold engine= thick oil + more friction + less horsepower. until an engine has reached its optimum temperature and oil is warm and not thick anymore, there will be alot more friction inside the engine making it harder for the car to run.
How- cooling oil why- overheating is bad for the engine parts
Friction is cut down in a car engine for two very important reasons. First, cutting down friction increases horsepower. It takes horsepower to overcome friction; so anything that can be done to cut down friction will increase the horsepower. Second, friction causes heat to be produced. Too much heat is bad, because if the engine gets too hot, then metal is softened and weakened, leading to failure of engine parts. The engine has a cooling system to remove unwanted heat, but too much friction would require a larger and more efficient cooling system to remove the excess heat, which would add expense and weight to the car. Motor oil is used to cut down the friction in the car engine. Also, very close tolerances in production of engine parts helps to cut down friction.