Fault with immobiliser, will require recoding of keys, of further diagnosis
i have had a new battery in my key fob, but it wont turn the engine on, do i have to get it tuned in to the electrics.?
leave the ignition turned on for 45mins or until the red security light on the dash has stoped flashing then start beware if the engine stalls or you turn the engine off you have to wait anutha 45mins
Where is the fuse for immobiliser on vauxhall corsa
If the immobiliser has failed and won't switch off with the remote key fob or the key operation then this is generally a job for your Renault Dealer. They have the equipment and expertise necessary to diagnose any fault with your immobiliser and to effect a suitable repair. No other comment can be made with reference to the immobiliser systems on vehicles due to the security issues resulting from this subject.
It's the immobiliser it's on all clio's
open the doors with the key turn the key on but not try to start wait for the alarm to stop the immo light on the dash should go out your free to start and drive good time to change the battery in your key if you lock the doors with the key it will arm the security system and you must turn it off with the key
I wouldn't
toyt
The Body Control Module contains the Immobiliser. Before towing a vehicle, the Immobiliser should be bypassed. This can be done by removing the Body Control Module. Worst case scenario, use a flat bed to haul instead of tow a vehicle.
The most simple way to bypass immobiliser is to drill out the bolts or do like i did and chisel off the black box on the back of the fuel pump. behind the black box you will find a fuel shut off solenoid ,put a live to the terminal (black and yellow wire that plugged into black box) you have now by passed the immobiliser
The Body Control Module contains the Immobiliser. Before towing a vehicle, the Immobiliser should be bypassed. This can be done by removing the Body Control Module. Worst case scenario, use a flat bed to haul instead of tow a vehicle.