Wiki User
∙ 14y agoThe studs themselves are torqued to about 45 foot pounds. The nuts are torqued to 20 foot pounds.
Wiki User
∙ 14y agoThe 1984 258 cubic inch engine rocker arm bolt torque specification is 30 pounds. You should torque the rocker arm bolts in 15 pound intervals.
There is no torque sequence just torque rocker arm studs to the proper torque
24 foot pounds
open the hood the very bottom pulley at the center of the engine bolts to the crankshaft
350's use rocker studs instead of bolts, and they are mounted to the heads.
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
According to most Oldmobile torque specs, the correct torque for rocker arm bolts is 25 ft-lbs.
Boston 3.0 liter engine rocker arm bolt torque specification is 20 pounds. The rocker arm bolts should be torqued in 10 pound intervals.
The 2000 Chevy Impala 3.4 liter engine rocker arm bolt torque specification is 45 pounds. The rocker arm bolts should be torqued in 15 pound intervals.
the two bolts, one on each side of the egr valve.
Follow the upper radiator hose to the engine. Where it connects to the engine you will find the thermostat under the thermostat housing. Usually 2 bolts holding it in place.