To set the clock on a 1989 Corvette the radio must be turned off. After turning the radio off hit the set button and then hit scan. The time can be set using the arrow buttons.
This information can be found in the owner's manual. This information can be found in the owner's manual.
If the clock/radio is anything like the one on the '93 Plymouth Voyager, here is how you set the clock: First turn on the radio, then press the set button. When it shows the "P" hit the select button, and it should change to just hours. Turn the Tuner knob to forward or back to set the time you want. Hit the Select button again to go to minutes, and do the same thing with the Tuner knob. Hitting the select button a third time will save the clock settings. ..
the cam gear mark is set at 6 o' clock and the crank gear mark is set at 12 o'clock.
As I recall, it was a matter of turning off the radio, pressing SET, and then holding SEEK or SCAN to set the hours or minutes. When finished, press SET again.
wuth key on acc. press CLOCK,SET,CLOCK. time and date will flash, then press SET until the desired setting appears then press clock again. repeat this until you are done.
With the radio turned off, push the set button. The scan button changes the hours and the seek button changes the minutes.
the clock is set for time
unhook - side of the battery and let set 5 mins and reconnect and the light will go out.
With the ignition in the ON position and the radio turned off, press the SET button. You will have 5 seconds to adjust the time using the SCAN and SEEK buttons.
Turn On the radio. Then hold down the CLOCK key while you use the Left/Right Arrow keys to scroll-up and down the time.
'how do I set the clock on a 2001 mercury mountaineer'