0
The generator is located above the oil filter and axle shaft.
1. Disconnect the negative battery cable.
2. Remove the 2 bolts from the top of the heat shield on the generator.
3. Remove nut from the upper T-bolt adjustment bracket.
4. Raise vehicle and support.
5. Remove the right front wheel.
6. Remove the accessory drive splash shield.
7. Remove the lower heat shield bolt.
8. Remove the generator heat shield.
9. Unplug the field circuit from the generator.
10. Remove the B+ terminal nut and wire.
11. Loosen the accessory drive belt t-bolt.
12. Remove the pencil strut.
13. Loosen the lower generator pivot bolt.
14. Remove the generator belt, refer to the Cooling section for more information.
15. Remove the axle retaining nut.
16. Remove the lower control arm from the steering knuckle.
17. Remove the 2 bolts for the axle shaft bearing support.
18. Remove the axle shaft assembly. Put a container under the transmission to catch the Transmission Fluid from the transmission.
19. Remove the generator from the lower mounting bracket and set generator to the side.
20 . Remove the lower mounting bracket for the generator.
21. Remove generator through the axle shaft hole.
Add your answer:
Earn +20 pts
How to replace the cabin air filter on a 2002 Chrysler PT Cruiser?
A 2002 PT Cruiser was not built with a cabin filter.
When was Chrysler PT Cruiser created?
Chrysler PT Cruiser was created in 2001.
Is Chrysler still making the PT Cruiser?
No. The Chrysler PT Cruiser was stopped in 2010.
Was there a 2011 Chrysler PT Cruiser?
No. The Chrysler PT Cruiser was built from 2001-2010.
How do you replace the evaporator core on a Chrysler PT Cruiser?
In order to change the evaporator in Pt Cruiser, the entire dash has to be removed, then replace the evaporator, and reinstall the complete dash.
How often to replace the timing belt on a Chrysler pt cruiser?
100,000 miles
When to replace the timing belt on a 2001 Chrysler PT Cruiser?
100,000 miles.
When to replace the timing belt on a 2005 Chrysler PT Cruiser?
100,000 miles.
Who makes the PT Cruiser?
Chrysler manufactures the PT Cruiser
How often to replace timing belt on a 2003 Chrysler PT Cruiser?
Replace it every 105,000 miles.
How often to replace the timing belt on a 2003 Chrysler pt cruiser?
100,000 miles.
How often to replace the spark plugs on a Chrysler PT Cruiser?
Every 60,000 miles.
