there is another name for this car so comment it
AC pressure transducer.
A pressure transducer measures pressure, specifically that of gases or liquids. Such pressure sensors are used in the measurement and control of thousands of everyday applications. A pressure transducer is just that; a transducer - it generates a signal due to the pressure imposed.
please give a simple defineatoin of transducer.
The engine computer uses the coolant temperature sensor and the air conditioning pressure transducer to decide when to operate the radiator fan. The coolant temperature sensor is located near the thermostat housing on top of the engine. The ac transducer is on the line between the compressor and condenser.The engine computer uses the coolant temperature sensor and the air conditioning pressure transducer to decide when to operate the radiator fan. The coolant temperature sensor is located near the thermostat housing on top of the engine. The ac transducer is on the line between the compressor and condenser.
There isn't one. This system uses an evaporator temperature probe and a high side pressure transducer. The temp probe is on the evaporator in the HVAC box, and the transducer is screwed into the discharge line under the hood.
Transducer (i.e. a device for converting energy from one form to another) for both vacuum and positive pressure.
This vehicle does not have a low pressure switch. It has a pressure transducer instead. The pressure transducer is located on the refrigerant line next to the alternator pulley.
Transducer (i.e. a device for converting energy from one form to another) for both vacuum and positive pressure.
On a 1993 Grand Am (and most other GM front drivers) there is no low pressure switch, instead it has a thermal expansion valve system with a "pressure transducer" located on the high pressure hose. The pressure transducer sends a square wave digital signal to the PCM, which can calculate high side pressure in PSI through a mathematical formula, which in turn sends a signal to the a/c compressor clutch relay to turn on if the pressure is within the set parameters. The a/c pressure transducer cannot be checked with a test light or such, you WILL short the computer if you try!!
it's in the high pressure side of the ac line
All that you need to do is unscrew if from the suction side and replace it...........