How do you replace bulb on mx 5?

Answer 1

1. Raise the headlights with the headlight switch (next to the hazard light in the centre of the dashboard, raises and lowers the lights without switching them on)

2.You are advised to remove the headlight switch mentioned above 30A fuse to stop it lowering while you are working on it. Which could cause injury

3. Remove the plastic cover round the headlight (4 screws).

4. Loosen screws around the edge of the lense (they are on springs so you can push the lense and retaining ring gently and rotate anticlockwise)

5. The lense and retaining ring should pop out or the slightly larger holes.

6. Pull out the lense and disconnect the headlight connector. You may have to push the sides of the connector to pull it out.

7. remove the sealing cover (black rubber cover at back of bulb)

8. unhook the retaining clip and remove the bulb by pulling it straight back. Do not rotate the bulb while removing it.

9. Install the new bulb in the reverse order of removal.