by going to a better internet site for information
How to replace spedo cable f250
To replace the clutch cable on a 1989 Mitsubishi Triton from the foot pedal to the motor you need to secure the vehicle with blocks behind all of the tires. Next, you will need to life up the frame to give you enough room to get under the vehicle safely. Remove the clutch cable from the motor first and follow it up to the foot pedal. Remove the cable from the foot pedal area and then attach the new cable.
There is no speedo cable on a Sunfire.
all you have to do is unscrew the cable from the top of your transmission, then from behind tbe actuall speedo
1996 ranger does not have speedo cable it is electronic
After removing the radio from a Mitsubishi Triton, use a grey cable from the back of a CD-ROM in the computer. Connect to a stereo mic jack for the input to add aux lead for iPod.
confirm gearbox isn't overfilled! Failing this replace speedo cable.
Fiero does not use a speedo cable There is an electronic sensor mounted on top of the transmission that both the engine computer and the speedo in the dash read to get the speed.
If you have a electrical speedo you don't have a cable. Change the speed sensor in the trans.
Fiero does not use a speedo cable There is an electronic sensor mounted on top of the transmission that both the engine computer and the speedo in the dash read to get the speed.
Fiero does not use a speedo cable There is an electronic sensor mounted on top of the transmission that both the engine computer and the speedo in the dash read to get the speed.
I think the '93 has an electric speedo. Take it to the spedo shop.