how to remove a rear tire on a troy bilt 42 in mower
It is not threaded.
most of them are , one bolt and a snap ring holding the tire so you need some snap ring pliers
13 x 6.50-6
Dynamite
with the motorcycle on the ground install tire change tool from tool kit across the tabs on the frame then put motorcycle on center stand. Remove rear fender bolts to raise rear fender, remove axle bolt then remove rear tire.
Lift the rear of the motorcycle, use a tire iron to loosen and remove lug nuts, and remove old tire. Now, put in the new tire, replace the lug nuts and tighten, lower the motorcycle to the ground.
how to remove a tire on 04 mazda3 bolts are off and tire wont come off
If you are removing a rear wheel from a riding mower with a square keyway, there is no need to remove the keyway. The tire and rim will slide off with it in place. The rim is slotted all the way through. After removing the wheel you can simply grab it with pliers if you need to remove it for some reason.
Remove the rear tire and wheel. Remove the axle end cap. Remove the rear wheel seal. Remove the rear wheel bearing. Reverse the process to install the new wheel bearing.
You jack the rear end up, and remove the nuts holding the wheel.
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.